Keysight (Agilent) 8167A CALIBRATION and Keysight (Agilent) 8167A REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 8167A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Tunable Laser Source (TLS)?
Shop for Comparable Products on our
 used Tunable Laser Source (TLS) page or new Tunable Laser Source (TLS) page

 
   Keysight (Agilent) 8167A   Description / Specification:    
Keysight (Agilent) 8167A 1280 to 1330 nm Tunable Laser Source

The HP 8167A tunable laser source is a basic tool for characterizing and testing optical amplifiers and components. The HP 8167A operates in the 1310 nm window. A built-in side mode filter ensures that a true single-mode laser line is generated for every wavelength point, eliminating any possible multimoding. A 0.001 nm resolution also makes these tunable lasers valuable tools for heterodyne measurements and coherent applications. Both tunable lasers provide independent control of output power and wavelength on a what-you-set-is-what-you-get basis. Wavelength scans, which require an output power that is stable over time and flat across all wavelengths, can be performed reliably, accurately, and quickly. Specifications. Wavelength Range: 1280 nm to 1330 nm. Absolute Wavelength Accuracy: <± 0.1 nm. Relative Wavelength Accuracy: ± 0.05 nm (lypical ± 0.02 nm). Wavelength Resolution: 0.001 nm, 170 MHz at 1300 nm. Wavelength Stability (typical over 1 h at constant temp.): <± 100 MHz. Wavelength Repeatability: ± 0.05 nm (typical: ± 0.02 nm). Sidemode Suppression Ratio: > 40 dB. Relative Intensity Noise RIN (typical): 145 dB/Hz. Linewidth (typical): < 100 kHz. Output Power: > -4 dBm to -10 dBm. Power Linearity: <± 0.1 dB. Power Stability (over 1 h): < ± 0.05 dB (Typical 0.01 dB). Power Repeatability (typical): < ± 0.04 dB. Output Isolation (typical): 60 dB. Return Loss (typical): 60 dB. Modulating Frequency: 250 Hz - 300 kHz (squarewave). Built-in HPIB. Option 003 Built-in Variable Attenuator.



 

Standard Calibration $350.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 8167A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bit Error Ratio (BER)
Bit Error Ratio (BER) is the ratio of errors caused by the number of bits in a data stream that have been altered due to noise, interference, distoriton or bit synchronization errors.

Flatness
Variation of insertion loss on the passband of an optical device.

Polarization Dependent Loss (PDL)
Polarization Dependent Loss is the difference between the maximum and minimum values of loss due to the variation of the polarization states of light propagating through a device. PDL is expressed in decibels. Calculated by; PDL = 10 log10 (Ep/Es), where EP and ES are the measured diffraction efficiencies for P- and S-plane polarized incident light, respectively.

Return Loss (RL)
Return Loss (RL) is the ratio of the incident power to the reflected power expressed in dB. RL = 10log (Pin/Pback)

Wavelength Resolution
Wavelength Resolution is the smallest possible displayed wavelength increment/decrement.


Please contact us for your Keysight (Agilent) 8167A CALIBRATION and/or Keysight (Agilent) 8167A 1280 to 1330 nm Tunable Laser Source REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: