Keysight (Agilent) 83403A CALIBRATION and Keysight (Agilent) 83403A REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 83403A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Laser Source (DFB-LD-WDM-BBS)?
Shop for Comparable Products on our  used Laser Source (DFB-LD-WDM-BBS) page or new Laser Source (DFB-LD-WDM-BBS) page

 
   Keysight (Agilent) 83403A   Description / Specification:   Spec Sheet 
Keysight (Agilent) 83403A 1550 nm Lightwave Source Module

The Agilent 83403A Lightwave Source Module is a laser diode source that is intended to be amplitude modulated for making frequency domain measurements of the modulation characteristics of lightwave componants. Specifications. Wavelength: 1550 ± 20 nm. RMS Spectral Widths: = 4 nm. Average Power (typical): 0.67 mW/0.5 mW. Responsivity at 50 MHz (nominal): 0.014 W/A / 0.007 mW, -37 dB/-43 dB. Modulation Frequency Range: 300 kHz to 3 GHz. Modulation Frequency Response, Uncorrected: ±3.5 dB. Power Stability, per 1000 h: 0.6% typical. Center Wavelength Temperature Coefficient: 0.4 nm/° C typical. Maximum Laser Chip Temperature Change: ±0.1° C typical. Center Wavelength Stability at 25° C: < 0.1 %/year typical. Compatible Fiber: 9/125 um fiber, Average Power: 1.25 ± 0.75 mW. Can be modulated by an external signal up to +14 dBm (maximum)RF power. DC power input: -12.6V supply is > -15V; +15V supply is < +17V. Options. Opt 011, Diamond HMS-10. Opt 012, FC/PC. Opt 013, DIN 47256. Opt 014, ST.



 

Standard Calibration $405.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 83403A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm
Optical power referenced to 1 millimatt

Multimode Fiber
Multimode Fiber has a large core (almost always 62.5 microns - a micron is one one millionth of a meter - but sometimes 50 microns) and is used with LED sources at wavelengths of 850 and 1300 nm for short distance, lower speed networks like LANs. Both multimode and singlemode fiber have an outside diameter of 125 microns - about 5 thousandths of an inch - just slightly larger than a human hair.

Power Repeatability
Power Repeatability is the random uncertainty in reproducing the power level after changing and re-setting the power level. The power repeatability is ± half the span (in dB) between the highest and lowest actual power. Note: - The long-term power repeatability can be obtained by taken the power repeatability and power stability into account.

Refractive Index
The refractive index or index of refraction of a substance is a measure of the speed of light in that substance. It is expressed as a ratio of the speed of light in vacuum relative to that in the considered medium. The velocity at which light travels in vacuum is a physical constant, and the fastest speed at which energy or information can be transferred. However, light travels slower through any given material, or medium, that is not vacuum.

Total insertion loss
A measure of the loss of light within an optical component


Please contact us for your Keysight (Agilent) 83403A CALIBRATION and/or Keysight (Agilent) 83403A 1550 nm Lightwave Source Module REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: