Keysight (Agilent) 8341A REPAIR and Keysight (Agilent) 8341A CALIBRATION

 
Custom-Cal has a high success rate in the repair of the Keysight (Agilent) 8341A. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 8341A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Signal Generator?
Shop for Comparable Products on our
 used Signal Generator page

 
   Keysight (Agilent) 8341A   Description / Specification:    
Keysight (Agilent) 8341A 20 GHz Synthesized Sweeper

The HP 8341A synthesized sweeper deliver the combined high-performance of a synthesizer and a broadband sweep oscillator in one efficient instrument that is completely controllable via the Hewlett-Packard Interface Bus (HP-IB). The synthesized broadband frequency coverage (10 MHz to 20 GHz and the precise 1 to 4 Hz frequency resolution (depending on the frequency band of the HP 8341A) are generated by indirect synthesis techniques. The HP 8341A also feature CW switching times of better than 50 ms (typically <35 ms). Additionally, a "Fast phase-lock" programming command can be used to reduce typical CW switching times to between 11 and 22 ms (depending on frequency step size and absolute frequency value). Analog sweep widths as narrow as 100 Hz or as broad as the full frequency range of the HP 8341A permit rapid and thorough testing of any device within their broad frequency ranges. The high performance pulse modulators of the HP 8341A Opt 006 offer >80 dB ON/ OFF ratio and <25 ns rise and fall times. Pulse amplitudes are leveled for pulse widths as narrow as 100 ns. The HP 8341A Opt 006 also features dc-coupled AM modulation with a 3 dB bandwidth of 100 kHz and a minimum depth of 90%. Pulse and amplitude modulation can be used simultaneously to simulate antenna scan patterns. Specifications. CW Mode Frequency Range: 10 MHz to 26.5 GHz. Time Base: Internal 10 MHz time base. Switching time: <50 ms to be within specified frequency resolution (PEAK function off), (Fast Phase Lock Mode reduces typical switching time to <20 ms). Start/Stop Frequency Range: 10 MHz to 19.9999999 GHz (Start); 10.0001 MHz to 20 GHz (Stop). Option 001: Front Panel RF Output Without Attenuator. Option 002: +13 dBm Output Power, 2.3 to 18.6 GHz. Option 004: Rear Panel RF Output With Attenuator. Option 005: Rear Panel RF Output Without Attenuator. Option 006: Pulse Modulation. Option 007: Improved Phase Noise Specifications.



 

Standard Calibration $560.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 8341A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm
dBm (sometimes dBmW) is an abbreviation for the power ratio in decibels (dB) of the measured power referenced to one milliwatt (mW). Zero dBm equals one milliwatt. A 3 dB increase represents roughly doubling the power, a 3 dB decrease, the power is reduced by about one half.

Millimeter-wave
Millimeter-wave is a term that generally refers to frequencies of 26.5 GHz and above. That is where signal wavelengths fall below approximately 10 mm, and thus the terminology changes from centimeters to millimeters.

Power Repeatability
Power Repeatability is the random uncertainty in reproducing the power level after changing and re-setting the power level. The power repeatability is ± half the span (in dB) between the highest and lowest actual power. Note: - The long-term power repeatability can be obtained by taken the power repeatability and power stability into account.

Stability
Stability is the extent to which a specified property, characteristic, or parameter of a substance, device, or apparatus, remains fixed with the passage of time or with varying environmental conditions.


Please contact us for your Keysight (Agilent) 8341A REPAIR and/or Keysight (Agilent) 8341A 20 GHz Synthesized Sweeper CALIBRATION

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: