Keysight (Agilent) 83480A REPAIR and Keysight (Agilent) 83480A CALIBRATION

Custom-Cal has a high success rate in the repair of the Keysight (Agilent) 83480A. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 83480A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Communication Analyzer?
Shop for Comparable Products on our
 used Communication Analyzer page or new Communication Analyzer page

   Keysight (Agilent) 83480A   Description / Specification:    
Keysight (Agilent) 83480A Digital Communications Analyzer

The Agilent 83480A Digital Communications Analyzer is a modular platform that accepts up to two plug-in modules. It provides fast, repeatable waveform performance analysis with automated pulse and eye-diagram statistical measurements. Optical or electrical conformance tests to both user-defined and industry standard eye-diagram masks or pulse templates are easily executed. Horizontal system: Scale factor full scale is ten divisions: 10 ps/div (min), 1 s/div (max). Delay Time offset relative to trigger: 22 ns (min), 1000 screen diameters or 10 s, whichever is smaller (max). Time interval accuracy: <= 8 ps +/-0.1% of reading (dual marker measurement). Time interval resolution: (screen diameter)/(record length) or 62.5 fs, whichever is larger. Time display resolution: 451 points horizontally. Trigger bandwidth: dc - 2.5 GHz, (2.0 GHz - 12 GHz, option 100). Sensitivity: 40 mV p-p at 100 MHz, increasing linearly to 200 mV p-p at 2.5 GHz (200 mV p-p from 2.0 GHz to 12 GHz (sine wave input) option 100). Pulse width: 200 ps >200 mV. Bandwidth limit: Trigger bandwidth reduced to approximately 100 MHz with bandwidth limit enabled. Maximum trigger signal: +/-2 Vdc + ac peak (+16 dBm). Jitter: <= 2.5 ps rms + 5E-5 x delay setting (at 2.5 GHz with 200 mV source), (< 2 ps rms with time delay less than 100 ns, option 100).


Standard Calibration $320.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 83480A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.

Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bandwidth is the difference between the upper and lower frequencies in a contiguous set of frequencies within which a fiber optic component, link or network will operate.

Multimode Fiber
Multimode Fiber has a large core (almost always 62.5 microns - a micron is one one millionth of a meter - but sometimes 50 microns) and is used with LED sources at wavelengths of 850 and 1300 nm for short distance, lower speed networks like LANs. Both multimode and singlemode fiber have an outside diameter of 125 microns - about 5 thousandths of an inch - just slightly larger than a human hair.

Synchronous Digital Hierarchy (SDH) is an international digital telecommunications network hierarchy which standardises transmission around the bit rate of 51.84 megabits per second, which is also called STS-1. Multiples of this bit rate comprise higher bit rate streams. Thus STS-3 is 3 times STS-1, STS-12 is 12 times STS-1, and so on. STS-3 is the lowest bit rate expected to carry ATM traffic, and is also referred to as STM-1 (Synchronous Transport Module-Level 1). The SDH specifies how payload data is framed and transported synchronously across optical fibre transmission links without requiring all the links and nodes to have the same synchronized clock for data transmission and recovery.

Please contact us for your Keysight (Agilent) 83480A REPAIR and/or Keysight (Agilent) 83480A Digital Communications Analyzer CALIBRATION

I'm interested in: 
Calibration Type (Select one):

Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:

What is the description of the problem?

How/when did the problem start?

 (*) Required Fields    For formal quote please fill in all fields.
From (Email):*
Contact Name:*
Address 1:
Address 2:
State/Territory/Province: *
Zip/Postal Code: