Keysight (Agilent) 83495A REPAIR and Keysight (Agilent) 83495A CALIBRATION

 
Custom-Cal has a high success rate in the repair of the Keysight (Agilent) 83495A. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 83495A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Fiber Optic Instrumentation?
Shop for Comparable Products on our
 used Fiber Optic Instrumentation page

 
   Keysight (Agilent) 83495A   Description / Specification:    
Keysight (Agilent) 83495A Clock Recovery Plug-in Module

The Agilent 83495A is a clock recovery plug-in module for the Agilent 86100 Infiniium DCA (Digital Communications Analyzer) mainframe. When a separate trigger is not available, or when standards specify that a trigger be derived using a clock recovery unit, the 83495A can be used to obtain a timing reference directly from the signal under test. Channel Type: Single Mode (Multimode Option 101) Optical & Electrical. Clock Recovery Phase Locked Loop Bandwidth: <=100 KHz or <=4 MHz (3.5 MHz typical) user selectable (Internal Path Triggering or External Output). Data Rates (Gb/s): 9.953 to 11.32. Tracking/Acquisition Range: Continuous within data rate range. Internal Splitter: 20/80 (30/70 option 101). Output Jitter: 0.01 UI (0.007 UI typical) RMS. Input Power for Clock Recovery: -11 dBm to +1 dBm optical, 0.10 to 2.0 Vp-p electrical (-8 dBm to +1 dBm optical, 0.10 to 2.0 Vp-p electrical, option 101). Auxiliary Recovered Clock and Regenerated Data Outputs: Type N with SMA adapters (no data output). Input Return Loss: 32 dB (28 dB option 101) maximum optical, DC to 2.5 GHz, 20 dB electrical, 2.5 GHz to 11.32 GHz, 15 dB electrical. Input Insertion Loss: 2.5 dB (3.0 dB option 101) maximum optical.



 

Standard Calibration $510.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 83495A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Amplified Spontaneous Emission Source (ASE)
ASE, a process where spontaneously emitted radiation (luminescence) is amplified. In lasers and particularly in high-gain erbium-doped amplifiers, amplified spontaneous emission is usually an unwanted effect. It tends to limit the gain achievable in a single stage of a fiber optic amplifier to the order of 40–50 dB.

Dynamic Range
In a transmission system, the ratio of the overload level to the noise level of the system, usually expressed in dB. Ratio of the highest to lowest detectable signal of a system, expressed in dB.

Optical Power
Optical Power is usually measured in "dBm", or decibels referenced to one miliwatt of power. while loss is a relative reading, optical power is an absolute measurement, referenced to standards. You measure absolute power to test transmitters or receivers and relative power to test loss.

Relative Wavelength Accuracy
When randomly changing the wavelength and measuring the differences between the actual and displayed wavelengths, the relative wavelength accuracy is ± half the span between the maximum and the minimum value of all differences.

Wavelength
Wavelength is a term for the color of light, usually expressed in nanometers (nm) or microns (m). In Fiber Optics the wavelenghts mostly used are in the infrared region where the light is invisible to the human eye.


Please contact us for your Keysight (Agilent) 83495A REPAIR and/or Keysight (Agilent) 83495A Clock Recovery Plug-in Module CALIBRATION

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: