Keysight (Agilent) 86112A REPAIR and Keysight (Agilent) 86112A CALIBRATION

The Keysight (Agilent) 86112A is currently in stock and available for purchase on our  Sales Page
It is also available for immediate rental.
Custom-Cal has a high success rate in the repair of the Keysight (Agilent) 86112A. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 86112A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Oscilloscope Plug In?
Shop for Comparable Products on our
 used Oscilloscope Plug In page

 
   Keysight (Agilent) 86112A   Description / Specification:    
Keysight (Agilent) 86112A Dual 20 GHz Electrical Plug-in Module

The Agilent 86112A is a 12.4 / 20 GHz, dual channel, electrical plug-in module for 86100 Infiniium DCA. It provides two measurement channels with user selectable bandwidths. The 12.4 GHz bandwidth mode provides better noise performance for accurate measurement of small signals. The 20 GHz bandwidth mode provides high fidelity display and measurement of very high speed waveforms. Specifications. Electrical Channel Bandwidth:12.4 and 20 GHz. Transition Time (10% to 90%, calculated from TR = 0.35/BW): 28.2 ps (12.4 GHz); 17.5 ps (20 GHz). RMS Noise Characteristic 0.25 mV (12.4 GHz); 0.5 mV (20 GHz). RMS Noise Maximum 0.5 mv (12.4 GHz); 1 mV (20 GHz). Scale Factor Minimum: 1 mV/division. Scale Factor Maximum: 100 mV/division. DC Accuracy (single marker): ±0.4% of full scale ±2mV ±1.5% of (reading-channel offset), 12.4 GHz; ±0.4% of full scale ±2 mV ±3% of (reading-channel offset), 20 GHz. CW Offset Range (referenced from center of screen): ±500 mV. Input Dynamic Range (relative to channel offset): ±400 mV. Maximum Input Signal: ±2 V (+16 dBm). Nominal Impedance: 50 ohm. Reflections (for 30 ps rise time): 5%. Electrical Input: 3.5 mm (male).



 

Standard Calibration $480.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 86112A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm
dBm (sometimes dBmW) is an abbreviation for the power ratio in decibels (dB) of the measured power referenced to one milliwatt (mW). Zero dBm equals one milliwatt. A 3 dB increase represents roughly doubling the power, a 3 dB decrease, the power is reduced by about one half.

Millimeter-wave
Millimeter-wave is a term that generally refers to frequencies of 26.5 GHz and above. That is where signal wavelengths fall below approximately 10 mm, and thus the terminology changes from centimeters to millimeters.

Power Repeatability
Power Repeatability is the random uncertainty in reproducing the power level after changing and re-setting the power level. The power repeatability is ± half the span (in dB) between the highest and lowest actual power. Note: - The long-term power repeatability can be obtained by taken the power repeatability and power stability into account.

Stability
Stability is the extent to which a specified property, characteristic, or parameter of a substance, device, or apparatus, remains fixed with the passage of time or with varying environmental conditions.


Please contact us for your Keysight (Agilent) 86112A REPAIR and/or Keysight (Agilent) 86112A Dual 20 GHz Electrical Plug-in Module CALIBRATION

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: