Keysight (Agilent) 86122A REPAIR and Keysight (Agilent) 86122A CALIBRATION

 
Custom-Cal has a high success rate in the repair of the Keysight (Agilent) 86122A. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 86122A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Wavelength Meter?
Shop for Comparable Products on our
 used Wavelength Meter page

 
   Keysight (Agilent) 86122A   Description / Specification:    
Keysight (Agilent) 86122A Optical Multi-Wavelength Meter

The Agilent 86122A Multi-Wavelength Meter measures the wavelength and optical power of laser light in the 1270–1650 nm wavelength range. Because the 86122A simultaneously measures multiple laser lines, you can characterize dense-wavelength-division-multiplexed (DWDM) systems and the multiple lines of Fabry-Perot lasers. Specifications. Wavelength : 1270 nm to 1650 nm. Absolute accuracy (lines separated by >=10 GHz): ±2 ppm (±0.3 pm at 1550 nm and 1310 nm). Differential accuracy (characteristic): ±0.15 ppm. Minimum resolvable separation (equal power lines input): 5 GHz (0.04 nm at 1550 nm, 0.03 nm at 1300 nm) for laser lines separated by >=10 GHz. Display resolution: 0.0001 nm. Amplitude Linearity (Lines above -30 dBm): ±0.3 dB (1270 to 1600 nm). Flatness, ±30 nm from any wavelength: 1270-1600 nm ±0.2 dB. Display resolution: 0.01 dB. Maximum safe input level (sum of all lines): +18 dBm. Measure up to 1000 laser lines simultaneously. Options. 021: Straight (non-angled) Contact Interface-PC (default). 022: Angled Contact Interface-APC. 400: Front Panel Fiber Input (default). 401: Rear Panel Fiber Input.



 

Standard Calibration $595.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 86122A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bit Error Ratio (BER)
Bit Error Ratio (BER) is the ratio of errors caused by the number of bits in a data stream that have been altered due to noise, interference, distoriton or bit synchronization errors.

Flatness
Variation of insertion loss on the passband of an optical device.

Polarization Dependent Loss (PDL)
Polarization Dependent Loss is the difference between the maximum and minimum values of loss due to the variation of the polarization states of light propagating through a device. PDL is expressed in decibels. Calculated by; PDL = 10 log10 (Ep/Es), where EP and ES are the measured diffraction efficiencies for P- and S-plane polarized incident light, respectively.

Return Loss (RL)
Return Loss (RL) is the ratio of the incident power to the reflected power expressed in dB. RL = 10log (Pin/Pback)

Wavelength Resolution
Wavelength Resolution is the smallest possible displayed wavelength increment/decrement.


Please contact us for your Keysight (Agilent) 86122A REPAIR and/or Keysight (Agilent) 86122A Optical Multi-Wavelength Meter CALIBRATION

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: