Keysight (Agilent) 8663A REPAIR and Keysight (Agilent) 8663A CALIBRATION

 
Custom-Cal has a high success rate in the repair of the Keysight (Agilent) 8663A. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 8663A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Signal Generator?
Shop for Comparable Products on our
 used Signal Generator page

 
   Keysight (Agilent) 8663A   Description / Specification:    
Keysight (Agilent) 8663A 2560 MHz Synthesized Signal Generator

The HP 8663A derives exceptional RF performance from an indirect frequency synthesis technique that results in frequency resolution of 0.1 Hz from 10kHz to 640 MHz, 0.2 Hz from 640 MHz to 1280 MHz and 0.4 Hz above 1280 MHz. Output level accuracy is held to ± 1 dB using microprocessor correction. This makes the HP 8663A an ideal generator for performing precise receiver sensitivity tests either manually or in automated systems. The HP 8663A offers versatile phase-locked AM/FM using either internal 400 Hz and I kHz rates or externally applied modulating signals, which can be either dc or ac coupled. Several different modes of simultaneous modulation (such as AM + FM or FM + FM) are possible. Fast frequency switching combined with microprocessor control gives the HP 8663A a powerful sweep capability. Automatic, single, and manual modes are available for both linear and logarithmic sweeps with user-selectable step size and number of steps. Specifications. Frequency Range: 100 kHz to 2560 MHz (2559.9999996 MHz). Resolution: 0.1 Hz (fc < 640 MHz), 0.2 Hz (640 MHz <= fc < 1280 MHz), 0.4 Hz (fc >=1280 MHz) . Output Level range: +16 dBm to -129.9 dBm, AM/FM, Pulse, optional Phase modulation, Typical absolute phase noise performance at a 1 kHz offset is as low as -135 dBc/Hz. Opt 001 RF connectors on rear panel only. Opt 002 Wideband linear phase modulation. Opt 003 Specified SSB phase noise for 640 MHz output. Opt 700 External MATE translator.



 

Standard Calibration $350.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 8663A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Available Gain
Available Gain is the ratio, at a specific frequency, of power available from the output to the power in from the source.

Decibel (dB)
A unit of measurement of power which indicates relative power. A -10 dB means a reduction in power by 10 times, -20 dB means another 10 times or 100 times overall, -30 means another 10 times or 1000 times overall and so on.

Mismatch Uncertainty
Mismatch Uncertainty is caused by re-reflections between one device (the source) and the device that follows it (the load).

Pulse Power
Pulse Power, the energy transfer rate is averaged over the pulse width. Pulse width is considered to be the time between the 50 percent risetime/falltime amplitude points. Pulse power averages out any aberrations in the pulse envelope such as overshoot or ringing.


Please contact us for your Keysight (Agilent) 8663A REPAIR and/or Keysight (Agilent) 8663A 2560 MHz Synthesized Signal Generator CALIBRATION

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: