Keysight (Agilent) 8665B REPAIR and Keysight (Agilent) 8665B CALIBRATION

 
Custom-Cal has a high success rate in the repair of the Keysight (Agilent) 8665B. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 8665B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Signal Generator?
Shop for Comparable Products on our
 used Signal Generator page

 
   Keysight (Agilent) 8665B   Description / Specification:    
Keysight (Agilent) 8665B 6.0 GHz Synthesized Signal Generator

The HP 8665B RF Signal Generator is for high-performance applications up to 6.0 GHz, particularly radar, telemetry and spurious testing of UHF receivers. FM rates of up to 2 MHz and deviations to 20 MHz peak are suitable for many applications such as higher-rate digital communications. An optional pulse modulator with on/off ratio of > 80 dB and rise/fall times of < 5 ns is available. Pulse width and delay can be internally adjusted between 50 ns and 999 ms, eliminating the need for an external pulse generator. Specifications. Frequency Range: 0.1 to 6000 MHz. Resolution: 0.01 Hz. Accuracy: Timebase stability x fc. Switching speed (typical): < 100 ms (Option 004). SSB phase noise @ 1 GHz (20 kHz offset): –117 dBc/Hz, –134 dBc/Hz (Option 004). Output LevelRange: + 13 to –139.9 dBm, + 9 dBm (Option 008). Resolution: 0.1 dB. Absolute accuracy: ± 1 dB, output >= –119.9 dBm 1 to 1000 MHz; ± 1.5 dB, output >= –119.9 dBm, 1000 to 3000 MHz. Interface: GPIB (IEEE 488.2-1987). Options. 001, High-Stability Timebase. 002, 2 GHz Doubled Output. 004, Low-Noise Option. 005, Electronic Attenuator (N/A with Option 002). 008, Pulse Modulation. 009, Specified VOR/ILS2. 011, 2 GHz Internal Frequency Counter. 003, Rear-Panel Input/Output. 010, Reduced-Leakage Configuration.



 

Standard Calibration $650.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 8665B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm
dBm (sometimes dBmW) is an abbreviation for the power ratio in decibels (dB) of the measured power referenced to one milliwatt (mW). Zero dBm equals one milliwatt. A 3 dB increase represents roughly doubling the power, a 3 dB decrease, the power is reduced by about one half.

Millimeter-wave
Millimeter-wave is a term that generally refers to frequencies of 26.5 GHz and above. That is where signal wavelengths fall below approximately 10 mm, and thus the terminology changes from centimeters to millimeters.

Power Repeatability
Power Repeatability is the random uncertainty in reproducing the power level after changing and re-setting the power level. The power repeatability is ± half the span (in dB) between the highest and lowest actual power. Note: - The long-term power repeatability can be obtained by taken the power repeatability and power stability into account.

Stability
Stability is the extent to which a specified property, characteristic, or parameter of a substance, device, or apparatus, remains fixed with the passage of time or with varying environmental conditions.


Please contact us for your Keysight (Agilent) 8665B REPAIR and/or Keysight (Agilent) 8665B 6.0 GHz Synthesized Signal Generator CALIBRATION

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: