Keysight (Agilent) 8703A REPAIR and Keysight (Agilent) 8703A CALIBRATION

The Keysight (Agilent) 8703A is currently in stock and available for purchase on our  Sales Page
It is also available for immediate rental.
Custom-Cal has a high success rate in the repair of the Keysight (Agilent) 8703A. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 8703A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Lightwave Measurement System?
Shop for Comparable Products on our
 used Lightwave Measurement System page or new Lightwave Measurement System page

 
   Keysight (Agilent) 8703A   Description / Specification:    
Keysight (Agilent) 8703A 20 GHz Lightwave Component Analyzer

The Agilent 8703A Lightwave Component Analyzer is a manufacturing test solution for diverse optical and electro-optical components, assemblies and devices as lasers and LEDs, photodiodes, fiber cables, connectors and transmitter/receiver pairs. Measurements can also be made on electrical microwave components such as amplifiers, cables, connectors, attenuators, and waveguides. Specifications. Electrical Source. Frequency Range: 130 MHz to 20 GHz. Output Power Range: +5 to -50 dBm in 5 dB steps at Port 1; -15 to -70 dBm in 5 dB steps at Port 2. Output Power Level: +5 dBm ± 3 dB at Port 1; -15 dBm plus coupler roll-off at Port 2. Connector Type: 3.5 mm (male). Lightwave Source. Wavelength: Standard (FP laser) 1308 ± 10 nm, Opt 210 (DFP laser) 1550 ± 10 nm, Opt 220 (DFP laser) 1308 ± 10 nm. Modulation Frequency Range: 130 MHz to 20 GHz. Compatible Fiber: 9/125 um.



 

Standard Calibration $1,350.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 8703A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Absolute Wavelength Accuracy
Absolute Wavelength Accuracy is the maximum difference between the actual wavelength and the displayed wavelength of the Optical Source. Wavelength is defined as wavelength in vacuum.

Decibel (dB)
A unit of measurement of optical power which indicates relative power. A -10 dB means a reduction in power by 10 times, -20 dB means another 10 times or 100 times overall, -30 means another 10 times or 1000 times overall and so on.

Nanometer (nm)
A unit of measure used to measure wavelength of light, meaning one one-billionth of a meter

Relative Intensity Noise (RIN)
Relative intensity noise (RIN), describes the instability in the power level of a laser. The noise term is important to describe lasers used in fiber-optic communication and LIDAR remote sensing. It is the square of the (spectrally resolved) RMS optical power amplitude divided by the measurement bandwidth and the square of the average optical power, expressed in dB/Hz.

Total Return loss
In an optical fiber, the loss that takes place at any discontinuity of refractive index, especially at an air-glass interface such as a fiber endface, at which a fraction of the optical signal is reflected back toward the source. RL = - 10log10 (Preflected/Preference)


Please contact us for your Keysight (Agilent) 8703A REPAIR and/or Keysight (Agilent) 8703A 20 GHz Lightwave Component Analyzer CALIBRATION

I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: