Keysight (Agilent) 8714ES REPAIR and Keysight (Agilent) 8714ES CALIBRATION

 
Custom-Cal has a high success rate in the repair of the Keysight (Agilent) 8714ES. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 8714ES Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Network Analyzer, SNA, VNA?
Shop for Comparable Products on our
 used Network Analyzer, SNA, VNA page or new Network Analyzer, SNA, VNA page

 
   Keysight (Agilent) 8714ES   Description / Specification:    
Keysight (Agilent) 8714ES 3 GHz S-parameter Vector Network Analyzer

The Agilent 8714ES features an S-parameter test set with full two-port vector-error correction, providing the highest level of measurement accuracy. This analyzer provides fast, complete swept-frequency and swept-power characterizarion of RF components. In addition: 300 kHz to 1.3 or 3 GHz models are available in both 50 ohm or 75 ohm options. A synthesized source provides fast, stable, high-resolution (1 Hz) stimulus for accurate measurements on a variety of RF components. Power sweeps enable testing of amplifier gain compression and AM-PM conversion. A 60 dB step attenuator provides a wide range of output power levels for testing active devices. Real-time sweep speeds with better than 10 updates per second facilitate high device throughput and increase tuning efficiency. A built-in 3.5-inch DOS-format disk drive provides unlimited data storage. Serial, parallel, LAN and GPIB interfaces make it easy to print or plot data to all printers and plotters. Flexible, sensitive receivers offer a choice between narrowband and broadband detection. Broadband detection allows scalar characterization of frequency-translating devices, while narrowband detection provides up to 100 dB of dynamic range for vector measurements of high-rejection devices. The Agilent 8714ES is equipped with a large, 9-inch monochrome display for clear view of measurement data, softkey functions, IBASIC programs, and markers. Display pass/fail indicators and trace data in color by connecting any VGA-compatible monitor. Two independent measurement channels let you display transmission and reflection data simultaneously. Each channel can have independent measurement parameters such as frequency range, IF bandwidth, number of points, and display formats. Display formats include SWR, linear and log magnitude, phase and group delay, Smith chart, polar, real and imaginary, dBW, dBm, dBµW, dBV, dBmV, and dBµV. Specifications. Frequency Range: 300 kHz to 3 GHz. Frequency Resolution: 1 Hz. Frequency Accuracy: < 5ppm. Harmonics: < -30 dBc. Minimum Frequency Narrowband: 300 kHz, Broadband: 10 MHz. Dynamic Range Narrowband, 50 ohm: >109 dB. Dynamic Range Broadband, 50 ohm: >54 dB. Options. Opt 1EC 75 ohm Impedance. Opt 1CL DIN Keyboard. Opt 1CM Rackmount Kit. Opt 100 Fault Location/SRL. Opt 101 Transport and Operating Case plus Fault Location/SRL. Opt AFN 50 ohm Economy Cable. Opt AFP 75 ohm Economy Cable. Opt B20 50 ohm Precision Cable. Opt B21 75 ohm Precision Cable.



 

Standard Calibration $675.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 8714ES. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Available Gain
Available Gain is the ratio, at a specific frequency, of power available from the output to the power in from the source.

Frequency Span
Frequency Span specifies the range between the start and stop frequencies, also referred to as bandwidth

Peak Envelope Power
Peak envelope power is the maximum value of the envelope power. Envelope power is measured by making the averaging time much less than 1/fm where fm is the maximum frequency component of the modulation waveform. The averaging time is therefore limited on both ends: (1) it must be small compared to the period of the highest modulation frequency, and (2) it must be large enough to be many RF cycles long.


Please contact us for your Keysight (Agilent) 8714ES REPAIR and/or Keysight (Agilent) 8714ES 3 GHz S-parameter Vector Network Analyzer CALIBRATION

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: