Keysight (Agilent) 8753E REPAIR and Keysight (Agilent) 8753E CALIBRATION

The Keysight (Agilent) 8753E is currently in stock and available for purchase on our  Sales Page
It is also available for immediate rental.
Custom-Cal has a high success rate in the repair of the Keysight (Agilent) 8753E. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 8753E Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Network Analyzer, SNA, VNA?
Shop for Comparable Products on our
 used Network Analyzer, SNA, VNA page or new Network Analyzer, SNA, VNA page

 
   Keysight (Agilent) 8753E   Description / Specification:    
Keysight (Agilent) 8753E S-parameter Network Analyzer

The HP 8753E RF network analyzer has an integrated S-parameter test set covering 30 kHz to 3 or 6 GHz, up to 110 dB of dynamic range, and both frequency and power sweeps. An integrated, synthesized source provides up to 10 mW of output power (100 mW for Option 011), 1 Hz frequency resolution, and linearfrequency, log-frequency, list-frequency, CW, and power sweep types. Three tuned receivers allow independent power measurements or simultaneous ratio measurements over a wide dynamic range of 105 dB at 6 GHz (with Option 006 frequency extension) or 110 dB at 3 GHz (standard). The integrated test set allows you to measure transmission and reflection characteristics of a device to 6 GHz without a frequency doubler. Test Port Output; Frequency Range: 30 kHz to 3 GHz (std.); 30 kHz to 6 GHz (Option 006); 300 kHz to 3 GHz (Option 011); 30 kHz to 6 GHz (Option 011, 006), Frequency Resolution: 1 Hz. Frequency Accuracy: ±10 ppm at 25 °C ± 5 °C. Power Range: -85 to 10 dBm; -85 to 8 dBm (Option 075). Output Resolution: 0.05 dB. Sweep Range: 25 dB. Output Level Accuracy: ±1.0 dB relative to 0 dBm output level. Test Port Input; Frequency Range: 30 kHz to 3 GHz (std.); 30 kHz to 6 GHz (Option 006). Average Noise Level 3 kHz BW: -82 dBm (<3 GHz), -77 dBm (3 to 6 GHz). Average Noise Level 10 Hz BW: -102 dBm (<3 GHz), -97 dBm (3 to 6 GHz) Maximum Input Level: +10 dBm. Options: 002, Harmonic Measurement Capability. 006, 6 GHz Frequency Extension. 010, Time-Domain Capability. 011, Delete Built-in Test Set. 075, 75 ohm Impedance. 1D5, High-Stability Frequency Reference. 1DT Delete Display.



 

Standard Calibration $675.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 8753E. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Harmonic
A harmonic of a wave is a component frequency of the signal that is an integer multiple of the fundamental frequency, i.e. if the fundamental frequency is f, the harmonics have frequencies 2f, 3f, 4f, . . . etc.

Phase Noise
Phase noise is the frequency domain representation of rapid, short-term, random fluctuations in the phase of a waveform, caused by time domain instabilities. Phase noise (L(f)) is typically expressed in units of dBc/Hz, representing the noise power relative to the carrier contained in a 1 Hz bandwidth centered at a certain offsets from the carrier.


Please contact us for your Keysight (Agilent) 8753E REPAIR and/or Keysight (Agilent) 8753E S-parameter Network Analyzer CALIBRATION

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: