Keysight (Agilent) 974A CALIBRATION and Keysight (Agilent) 974A REPAIR

A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 974A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Multimeter DMM?
Shop for Comparable Products on our
 used Multimeter DMM page

   Keysight (Agilent) 974A   Description / Specification:    
Keysight (Agilent) 974A 4 1/2 Digit Digital Multimeter

The HP 974A Multimeter has 4 1/2 digits with a dc accuracy of 0.05%,100 kHz BW true rms. ac+dc, and dB/dBm with 0.01 dB resolution make th is the best value for high precision. Min/Max with time stamp to monitor all types of measurements including temperature, Hold and Auto Hold for saving a reading manually or automatically and average to quiet noisy measurements. Auto diode reverses the leads for you to check semiconductor junction. a secondary digital display shows the range of the function or elapsed time in Min/Max, and auto power off turns off the meter after 30 minutes of inactivity, or defeat it for extended measurements. Specifications. Display count: 49999. Basic accuracy DC volts: 0.05%. Basic accuracy AC volts: 0.5%. Basic accuracy ohms: 0.06%. Frequency response, AC volts: 100 kHz. DC volts Resolution/maximum reading: 10 µV / 1000 V. AC volts Resolution/maximum reading: 10 µV / 750 V. Ohms Resolution/maximum reading: 0.01 ohm / 50 M-ohm. Current Resolution/maximum reading: 10 nA / 10 A. Elapsed Time Resolution/maximum reading: 1 sec / 9999 min. Frequency Resolution/maximum reading: 0.01 Hz / 200 kHz. Thermistor temperature and bargraph.


Standard Calibration $60.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 974A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.

Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Crest Factor
Crest factor or peak-to-average ratio (PAR) is a measurement of a waveform, calculated from the peak amplitude of the waveform divided by the RMS value of the waveform

Linearity is the relative difference between the displayed power ratio, Dx/D0, and the actual (true) power ratio Px/P0 caused by changing the displayed power level from the reference level, D0, to an arbitrary displayed level, Dx.

Phase Noise
Phase noise is the frequency domain representation of rapid, short-term, random fluctuations in the phase of a waveform, caused by time domain instabilities. Phase noise (L(f)) is typically expressed in units of dBc/Hz, representing the noise power relative to the carrier contained in a 1 Hz bandwidth centered at a certain offsets from the carrier.

Sensitivity is the minimum magnitude of input signal required to produce a specified output signal having a specified signal-to-noise ratio, or other specified criteria.

Please contact us for your Keysight (Agilent) 974A CALIBRATION and/or Keysight (Agilent) 974A 4 1/2 Digit Digital Multimeter REPAIR

I'm interested in: 
Calibration Type (Select one):

Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:

What is the description of the problem?

How/when did the problem start?

 (*) Required Fields    For formal quote please fill in all fields.
From (Email):*
Contact Name:*
Address 1:
Address 2:
State/Territory/Province: *
Zip/Postal Code: