Keysight (Agilent) E3616A REPAIR and Keysight (Agilent) E3616A CALIBRATION
The Keysight (Agilent) E3616A is currently in stock and available for purchase on our  Sales Page
It is also available for immediate rental.
Custom-Cal has a high success rate in the repair of the Keysight (Agilent) E3616A. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) E3616A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another DC Power Supply?
Shop for Comparable Products on our  used DC Power Supply page

 
   Keysight (Agilent) E3616A   Description / Specification:    
Keysight (Agilent) E3616A Single-output CV/CC DC Power Supply

The Agilent E3616A Single-output CV/CC DC power supply can be used as either a voltage source or current source. The CC-set button allows you to quickly set the current limit when operating in the CV mode, without shorting the output. 10-turn controls allow accurate adjustment of voltage and current output settings. The output voltage and current can also be controlled with external 0 to 10 volt analog signals or variable resistance. Output connections can be made on either the front or rear panel. Remote sensing is available to eliminate the errors in voltage regulation due to voltage drops in the load leads. Either the positive or negative output terminal may be connected to ground to provide positive or negative output voltage. Either terminal can also be floated to a maximum of 240 volts. Multiple units can be combined in auto-parallel, autoseries and auto-tracking configurations to obtain more voltage or current output. The load is protected with the over-voltage protection feature, which is easily monitored and adjusted from the front panel. The digital voltage and current meters provide continuous and accurate readings of the output levels. Output Range: 0 to 35 V, 0 to 1.7 A (60 W). Load and line regulation: 0.01% +2 mV. Ripple and noise: rms 200 µV, peak-to-peak 1 mV. Resolution Voltage: 10 mV (0-20 V), 100 mV (20 V). Resolution Current: 1 mA.



 

Standard Calibration $95.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) E3616A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bandwidth
Bandwidth is the difference between the upper and lower frequencies in a contiguous set of frequencies within which a component, link or network will operate.

Frequency Span
Frequency Span specifies the range between the start and stop frequencies, also referred to as bandwidth

Noise Figure
Noise Figure the ratio of the signal-to-noise power ratio at the input to the signal-to-noise power ratio at the output.

Ringing
Ringing is an unwanted oscillation of a voltage or current.

Please contact us for your Keysight (Agilent) E3616A REPAIR and/or Keysight (Agilent) E3616A Single-output CV/CC DC Power Supply CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: