Keysight (Agilent) E3617A CALIBRATION and Keysight (Agilent) E3617A REPAIR
The Keysight (Agilent) E3617A is currently in stock and available for purchase on our  Sales Page
It is also available for immediate rental.
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) E3617A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another DC Power Supply?
Shop for Comparable Products on our  used DC Power Supply page

 
   Keysight (Agilent) E3617A   Description / Specification:    
Keysight (Agilent) E3617A Single-output CV/CC DC Power Supply

The Agilent E3617A Single-output CV/CC DC power supply can be used as either a voltage source or current source. The CC-set button allows you to quickly set the current limit when operating in the CV mode, without shorting the output. 10-turn controls allow accurate adjustment of voltage and current output settings. The output voltage and current can also be controlled with external 0 to 10 volt analog signals or variable resistance. Output connections can be made on either the front or rear panel. Remote sensing is available to eliminate the errors in voltage regulation due to voltage drops in the load leads. Either the positive or negative output terminal may be connected to ground to provide positive or negative output voltage. Either terminal can also be floated to a maximum of 240 volts. Multiple units can be combined in auto-parallel, autoseries and auto-tracking configurations to obtain more voltage or current output. The load is protected with the over-voltage protection feature, which is easily monitored and adjusted from the front panel. The digital voltage and current meters provide continuous and accurate readings of the output levels. Output Range: 0 to 60 V, 0 to 1.0 A (60 W). Load and line regulation: 0.01% +2 mV. Ripple and noise: rms 200 µV, peak-to-peak 1 mV. Resolution Voltage: 10 mV (0-20 V), 100 mV (20 V). Resolution Current: 1 mA.



 

Standard Calibration $95.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) E3617A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Carrier Wave (CW)
Carrier Wave or Continuous Wave is a sinusoidal signal without modulation.

Harmonic
A harmonic of a wave is a component frequency of the signal that is an integer multiple of the fundamental frequency, i.e. if the fundamental frequency is f, the harmonics have frequencies 2f, 3f, 4f, . . . etc.

Noise Floor
Noise floor is the measure of the signal created from the sum of all the noise sources and unwanted signals within a measurement system.

Ripple
Ripple is the small unwanted residual periodic variation of the direct current (dc) output

Please contact us for your Keysight (Agilent) E3617A CALIBRATION and/or Keysight (Agilent) E3617A Single-output CV/CC DC Power Supply REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: