Keysight (Agilent) E3630A REPAIR and Keysight (Agilent) E3630A CALIBRATION
 
Custom-Cal has a high success rate in the repair of the Keysight (Agilent) E3630A. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) E3630A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another DC Power Supply?
Shop for Comparable Products on our  used DC Power Supply page

 
   Keysight (Agilent) E3630A   Description / Specification:    
Keysight (Agilent) E3630A Triple Output DC Power Supply

The Agilent E3630A Triple Output DC Power Supply has 0.01% load and line regulation which keeps the outputs steady with changes of the power line and load. The low normal-mode noise specification of 350 µV rms assures clean power for precision circuitry, and the low common-mode current specification of 1 µA rms minimizes line frequency current injection. It has separate digital panel meters to monitor both the voltage and current of any output simultaneously. An LED indicator for each output lets the user know when any supply is overloaded. All the outputs are protected against overload and short-circuit damage. Protection circuits prevent output voltage overshoot when supply is turned on and off. The +6 V output of E3630A employs current foldback; all others are current limited. The three outputs include, one 0 to 6 V output to power logic or other circuitry and one 0 to +20 V and 0 to -20 V to power linear circuits. The 0 to +20 V and 0 to -20 V outputs track to within 1%. The 0 to -20 V output can be set to any value less than the 0 to +20 V output. One voltage control may be used to vary both simultaneously. Specifications. Number of output ranges: 1. Output ratings: Output 1; 0 to 6 V, 0 to 2.5 A. Output 2; 0 to +20 V, 0 to 0.5 A. Output 3; 0 to -20 V, 0 to 0.5 A. Power (max.): 35W. Load and line regulation: 0.01% +2 mV. Ripple and noise: rms 350 µV, peak-to-peak 1.5 mV. Control mode: CV/CL (±20 V), CV/CF (+6 V). Resolution: Voltage 10 mV, Current 10 mA.



 

Standard Calibration $185.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) E3630A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Channel Bandwidth
Channel Bandwidth is the bandwidth over which power is measured. This is usually the bandwidth in which almost all of the power of a signal is contained.

Jitter
Jitter in technical terms is the deviation in or displacement of some aspect of the pulses in a high-frequency digital signal. Jitter is the time variation of a periodic signal in electronics and telecommunications, often in relation to a reference clock source. Jitter may be observed in characteristics such as the frequency of successive pulses, the signal amplitude, or phase of periodic signals. Jitter is a significant, and usually undesired, factor in the design of almost all communications links (e.g., USB, PCI-e, SATA, OC-48). In clock recovery applications it is called timing jitter.

Overshoot
Overshoot is the distortion that follows a major transition; the difference between the peak power point and the pulse-top amplitude computed as a percentage of the pulse-top amplitude.

Rise Time
Rise time refers to the time required for a signal to change from a specified low value to a specified high value, usually 10 and 90 percent of pulse-top amplitude (vertical display is linear power).

Please contact us for your Keysight (Agilent) E3630A REPAIR and/or Keysight (Agilent) E3630A Triple Output DC Power Supply CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: