Keysight (Agilent) E4416A CALIBRATION and Keysight (Agilent) E4416A REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) E4416A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another RF Power Meter?
Shop for Comparable Products on our
 used RF Power Meter page

 
   Keysight (Agilent) E4416A   Description / Specification:    
Keysight (Agilent) E4416A EPM Single-Channel RF Power Meter

The Agilent E4416A single-channel EPM-P power meter is used with E9320 power sensors to make accurate power measurements. You can perform peak, peak-to-average ratio, and average power measurements on all the common modulation formats used in wireless communications. Time-gated power measurements can also be made using the meters’ comprehensive triggering features. It can perform power measurements at rates up to 1000 readings per second over the GPIB. The E9320 power sensor family has two frequency ranges are available: 50 MHz to 6 GHz, and 50 MHz to 18 GHz. There are also three modulation bandwidths: 300 kHz for TDMA signals, 1.5 MHz for CDMA (IS-95A) signals and 5 MHz for wideband-CDMA signals. Specifications. Frequency Range: 9 kHz to 110 GHz, sensor dependent. Power Range: –70 to +44 dBm, sensor dependent. Display Units Absolute: Watts or dBm; Relative: Percent or dB. Display Resolution: Selectable resolution of 1.0, 0.1, 0.01, 0.001 dB in logarithmic mode, or 1 to 4 significant digits in linear mode. Modulation Bandwidth: 5MHz maximum (set by meter and is sensor dependent). Time Base Accuracy: 0.1%. Trigger Sources: Internal, External TTL, GPIB, RS232/422. Options. Opt 002 Supplies rear-panel sensor input (power reference calibrator is on the front panel). Opt 003 Supplies rear-panel sensor input (power reference calibrator is on the rear panel).



 

Standard Calibration $95.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) E4416A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm
dBm (sometimes dBmW) is an abbreviation for the power ratio in decibels (dB) of the measured power referenced to one milliwatt (mW). Zero dBm equals one milliwatt. A 3 dB increase represents roughly doubling the power, a 3 dB decrease, the power is reduced by about one half.

Noise Figure
Noise Figure the ratio of the signal-to-noise power ratio at the input to the signal-to-noise power ratio at the output.

Standing Wave Ratio (SWR)
Standing wave ratio (SWR) is the ratio of the amplitude of a partial standing wave at an antinode (maximum) to the amplitude at an adjacent node (minimum).


Please contact us for your Keysight (Agilent) E4416A CALIBRATION and/or Keysight (Agilent) E4416A EPM Single-Channel RF Power Meter REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: