Keysight (Agilent) E4430A CALIBRATION and Keysight (Agilent) E4430A REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) E4430A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Signal Generator?
Shop for Comparable Products on our  used Signal Generator page

 
   Keysight (Agilent) E4430A (ESG-D1000A)   Description / Specification:    
Keysight (Agilent) E4430A ESG-D1000A 1000 MHz Digital RF Signal Generator

The HP E4430A ESG-D1000A Digital Signal Generator provides a wide range of digital modulation capabilities. Built-in personalities for common communication standards Internally generate pi/4 DQPSK and GSMK signals to meet the test requirements of NADC, PDC, PHS and GSM receivers. Offering a choice of internal or external data generation, and flexible framing and timeslot configuration capabilities. Flexible frames and timeslots, as well as internal burst and data generation easily configure timeslots to simulate different types of traffic, control, or synchronization channels (or bursts). Generate mobile- or base-station transmissions for a variety of digital communications standards with the internal burst capabilities. Also, the E4430A ESG-D1000A reduces the need for external equipment with comprehensive data generation capabilities. Use the analog I and Q inputs to generate the complex modulation formats (such as BPSK, QPSK, and 16QAM), required for the development and testing of RF digital communications systems. A built-in quadrature modulator processes the I and Q input signals, to provide superior modulation accuracy and stability, over a 10 MHz (1 dB) bandwidth. Extremely stable dc FM precisely reproduces digital signaling for FM receivers with selective squelch control. Wideband phase modulation capabilities are useful for satellite communications applications, offering deviations up to 90 radians and 6 MHz rates. Wide power range (+13 to -136 dBm). Level accuracies of better than ±1.1 dB for the built-in modulation formats and typically less than ±0.6 dB, ensures precise measurement of even the most sensitive digital receivers.Specifications. Frequency: 250 kHz to 1000 MHz. Burst Envelope Rise/Fall Time: <2 µs, typical. NADC Data Rates: 48.6 kbits/sec. PDC Data Rates: 42 kbits/sec. PHS Data Rates: 384 kbits/sec. GSM (DCS1800/PCS1900) Data Rates: 270.833 kbits/sec. Coherent Carrier Out Range: 250 MHz to maximum carrier frequency. Interface: HP-IB (IEEE-488.2-1987) with Listen and Talk. RS-232. Options. Opt 1EM: Move Connectors to Rear Panel. Opt 1E5: Add High-Stability Timebase. Opt 1EH: Add GSM, NADC, PDC, and PHS.



 

Standard Calibration $890.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) E4430A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm
dBm (sometimes dBmW) is an abbreviation for the power ratio in decibels (dB) of the measured power referenced to one milliwatt (mW). Zero dBm equals one milliwatt. A 3 dB increase represents roughly doubling the power, a 3 dB decrease, the power is reduced by about one half.

Millimeter-wave
Millimeter-wave is a term that generally refers to frequencies of 26.5 GHz and above. That is where signal wavelengths fall below approximately 10 mm, and thus the terminology changes from centimeters to millimeters.

Power Repeatability
Power Repeatability is the random uncertainty in reproducing the power level after changing and re-setting the power level. The power repeatability is ± half the span (in dB) between the highest and lowest actual power. Note: - The long-term power repeatability can be obtained by taken the power repeatability and power stability into account.

Stability
Stability is the extent to which a specified property, characteristic, or parameter of a substance, device, or apparatus, remains fixed with the passage of time or with varying environmental conditions.

Please contact us for your Keysight (Agilent) E4430A CALIBRATION and/or Keysight (Agilent) E4430A ESG-D1000A 1000 MHz Digital RF Signal Generator REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: