|
|
The Agilent E5052A 7 GHz Signal Source Analyzer is an all-in-one solution is optimized for efficient measurements, high reliability, and offers easy-to-use features to minimize training and increase productivity. The Signal Source Analyzer provides a true one-step phase noise measurement. Built-in low-noise reference sources, lock the system to the carrier of the measured signal, automatically enabling and dramatically improving measurement speed. With a frequency offset range between 1 kHz to 40 MHz, measurements only take 0.3 seconds per measurement. Dual channel receivers enable a “cross-correlation” technique to lower the instrument’s noise floor at all offset frequencies. Correlations of up to 10,000-times produces a 20 dB phase noise sensitivity improvement. Integrated phase noise between two points specified by the band marker function can be automatically calculated. Both rms jitter and residual FM are also displayed. Specifications. Frequency range: 10 MHz to 7 GHz. Input power level: -20 dBm to +20 dBm (RF input). Measurement Parameters: Frequency, RF power, and DC current. RF power Resolution: 0.01 dB. RF power Accuracy: ± 0.5 dB. Frequency Resolution: 10 Hz, 1 kHz, 64 kHz. Frequency Accuracy: ± (frequency resolution + time base accuracy). Phase noise Offset frequency range: 1 Hz to 40 MHz. Spectrum monitor: 15 MHz max Span, RBW = 1 Hz to 100 kHz. DC sources Control voltage: -15 to +35 volt, 20 mA max. Display Size: 10.4 in TFT color LCD. Options. 011, Delete functions. 012, Add standard functions. 018, Add hard disk drive kit.
|