ANDO AQ8201-22 CALIBRATION and ANDO AQ8201-22 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANDO AQ8201-22 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Optical Power Meter?
Shop for Comparable Products on our  used Optical Power Meter page or new Optical Power Meter page

 
   ANDO AQ8201-22 (AQ-8201-22)   Description / Specification:    
ANDO AQ8201-22 Dual OPM Module (Optical powermeter)

The Ando AQ8201-22 Dual OPM Module (Optical powermeter) is for use with the AQ8201 series, Optical Test and Measurement System. Specificaions. Wavelength range: 1280 to 1700 nm. Photodetector: InGaAs. Application: Small-diameter silica fiber emission. Optical connector: AQ9389B (FC) Connector Adapter (standard). Polarization dependant loss (at 1550nm wavelength, SM fiber): 0.02 dB P-P (typical). Power range CW light: -80 to +10 dBm at 1310 nm. Power range Chopped light: -80 to +24 dBm at 1310 nm. Inaccuracy under reference condition: ± 2.5 % (at 1550 nm calibration point). Total accuracy: ± 5% (1470 to 1610 nm). Linearity: ±0.05 dB (1470 to 1610 nm, -73 to +10 dBm). Noise (CW light / Chopped light): - 73 dBm or less.



 

Standard Calibration $245.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANDO AQ8201-22. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bit Error Ratio (BER)
Bit Error Ratio (BER) is the ratio of errors caused by the number of bits in a data stream that have been altered due to noise, interference, distoriton or bit synchronization errors.

Flatness
Variation of insertion loss on the passband of an optical device.

Polarization Dependent Loss (PDL)
Polarization Dependent Loss is the difference between the maximum and minimum values of loss due to the variation of the polarization states of light propagating through a device. PDL is expressed in decibels. Calculated by; PDL = 10 log10 (Ep/Es), where EP and ES are the measured diffraction efficiencies for P- and S-plane polarized incident light, respectively.

Return Loss (RL)
Return Loss (RL) is the ratio of the incident power to the reflected power expressed in dB. RL = 10log (Pin/Pback)

Wavelength Resolution
Wavelength Resolution is the smallest possible displayed wavelength increment/decrement.

Please contact us for your ANDO AQ8201-22 CALIBRATION and/or ANDO AQ8201-22 Dual OPM Module (Optical powermeter) REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: