ANRITSU 37347A REPAIR and ANRITSU 37347A CALIBRATION
 
Custom-Cal has a high success rate in the repair of the ANRITSU 37347A. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANRITSU 37347A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Network Analyzer, SNA, VNA?
Shop for Comparable Products on our  used Network Analyzer, SNA, VNA page or new Network Analyzer, SNA, VNA page

 
   ANRITSU 37347A   Description / Specification:    
ANRITSU 37347A 20 GHz Vector Network Analyzer

The Anritsu 37347A is a microprocessor controlled Vector Network Analyzer. It integrates a synthesized source, S-parameter test set and tuned receiver into a single compact package that is ideal for bench-top testing. It provides: 40 MHz to 20 GHz, Fast Sweeping Synthesized Source, Auto Reversing Test Set, Solid-State Transfer Switch, Four Independent Displays, Internal Hard and Floppy Disk Drives, LRL/LRM Calibration, Adapter Removal Calibrations and Fast Measurement Throughput via GPIB. Specifications. Frequency Range: 40 MHz to 20 GHz. Dynamic Range (“Receiver Dynamic Range” is defined as the ratio of the maximum signal level at Port 2 for 0.1 dB compression to the noise floor at Port 2.; “System Dynamic Range” is defined as the ratio of the power incident on Port 2 in a through line connection to the noise floor at Port 2 (forward measurements only). 10 Hz IF bandwidth and 512 averages were used in calibration and measurement.) Max Signal Into Port 2: 30 dBm. Noise Floor: -65 dBm @ 0.04 GHz, -83 dBm @ 20 GHz, Max. -91 dBm @ 2 GHz. Receiver Dynamic Range: 100 @ 0.04 GHz, 126 @ 20 GHz, Max. 128 @ 2 GHz. Port 1 Power: 5 dBm @ 0.04 GHz, 5 dBm @ 20 GHz. System Dynamic Range: 70 @ 0.04 GHz, 96 @ 20 GHz, Max. 98 @ 2 GHz. High Level Noise (typical): <0.04 dB and <0.5 peak-to-peak variation in a 1 kHz IF bandwidth up to 20 GHz. Measurement Time vs. Span for 101 Data Points (typical): 40 MHz to 20 GHz, 500 ms. Number of Channels: Four independent measurement channels. Parameters: S11, S21, S22, S12, or user-defined combinations of a1, a2, b1, and b2. All measurements are made without the need to manually reverse the test device. Display LCD, Color, 8.5-inch diagonal. Options. Opt 1, Slide Rack Mounting. Opt. 1A, Rack Mounting. Opt 2, High Speed Time (Distance) Domain Measurement Capability. Opt 4, External SCSI-2 Hard Disk Drive Compatibility. Opt 7A/N/NF/S/K, Universal Test Port Configuration, Replaces Universal / K Connector (standard) with: 7A - Universal / GPC-7, 7N - Universal / N, male, 7NF - Universal / N, female, 7S - Universal / 3.5 mm, male. Opt 10A, High Stability Time Base.



 

Standard Calibration $800.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANRITSU 37347A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBc
dBc (decibels relative to the carrier) is the power ratio of a signal to a carrier signal, expressed in decibels. If the dBc figure is positive, then the relative signal strength is greater than the carrier signal strength. If the dBc figure is negative, then the relative signal strength is less than carrier signal strength.

Noise Density
Noise Density is the amount of noise within a defined bandwidth, usually normalized to 1 Hz.

Spurious Signals
Spurious signals are undesired signals. They can be considered in two classes. They can be stationary; their frequency and amplitude do not change significantly, or non-stationary, where the frequency and/or amplitude change significantly over short time periods.

Please contact us for your ANRITSU 37347A REPAIR and/or ANRITSU 37347A 20 GHz Vector Network Analyzer CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: