ANRITSU MG3691A CALIBRATION and ANRITSU MG3691A REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANRITSU MG3691A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Signal Generator?
Shop for Comparable Products on our
 used Signal Generator page

 
   ANRITSU MG3691A   Description / Specification:    
ANRITSU MG3691A 8.4 GHz Synthesized Signal Generator

The Anritsu MG3691A synthesized signal generator is a microprocessor-based, synthesized signal source with high resolution phase-lock capability. It can generate both discrete CW frequencies and broad (full range) and narrow band step sweeps across the frequency range of 2 GHz to 8.4 GHz. Options are available to extend the low end of the frequency range to 0.1 Hz. All functions of the signal generator are fully controllable locally from the front panel or remotely (except for power on/standby) via the IEEE-488 General Purpose Interface Bus. Specifications. Frequency Range: 2 GHz to 8.4 GHz. Resolution - 0.01 Hz. Phase Offset - 0.1 dB steps. RF Frequency Coverage Extension, down to 0.1 Hz. An optional down-converter covers 10 MHz to 2 GHz, An optional DDS offers additional coverage to 0.1 Hz. Excellent Phase Noise performance as standard. Add optional ultra low phase noise > 2 GHz. Add an optional digital down-converter for: Lowest Phase Noise RF source from 10 MHz to 2.2 GHz ( < 130 dBc/Hz @ 1 GHz, 10 kHz offset). Power Output: 13 dBm standard, 19 dBm option 15. Wide Attenuation Range. - 110 dB Mechanical Attenuator Option. - 120 dB Electronic Attenuator Option. AM/FM/ØM/PM, External or Internal. - 100 ns leveled pulse width >2 GHz, 1 µs <2 GHz. IF Up-Conversion Option. Obtain IQ-modulation microwave signals by up-converting a modulated IF signal. Digital or Analog Sweep



 

Standard Calibration $690.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANRITSU MG3691A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Dynamic range
Dynamic range the ratio of a specified maximum level of a parameter, such as power, current, voltage or frequency, to the minimum detectable value of that parameter.

Modulation
Modulation is the process by which the characteristic of one wave (the carrier) is modified by another.

Repeatability
Repeatability is the variation in a number of repeated measured quantities when measurement conditions are changed and restored. The value corresponds to half the spread between the minimum and maximum value measured.


Please contact us for your ANRITSU MG3691A CALIBRATION and/or ANRITSU MG3691A 8.4 GHz Synthesized Signal Generator REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: