ANRITSU MG9637A CALIBRATION and ANRITSU MG9637A REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANRITSU MG9637A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Tunable Laser Source (TLS)?
Shop for Comparable Products on our
 used Tunable Laser Source (TLS) page or new Tunable Laser Source (TLS) page

 
   ANRITSU MG9637A   Description / Specification:    
ANRITSU MG9637A 1500 to 1580 nm Tunable Laser Source

The Anritsu The MG9637A Tunable Laser Source is designed to meet excellent wavelength repeatability, it is achieved by self-calibration and improved reliability using a new external cavity technology. The MG9637A utilize an external optical automatic power control (APC) module, the MG9637A has an Lithium Niobate modulator in the APC section to provide excellent output power stability and S/N ratio. The power of Output 1 of the MG9637A has been stabilized to ±0.01 dB using the APC function, permitting easy and stable wavelength loss measurement of optical devices. In addition, the wavelength flatness is within ±0.1 dB, enabling high-accuracy measurement of wavelength loss without normalization of the output power of the laser source. The coherence control function broadens the linewidth to about 50 MHz eliminating level fluctuations due to interference and permitting accurate measurement. Specifications. Wavelength range: 1500 to 1580 nm. Wavelength setting resolution: 1 pm. Absolute wavelength accuracy: <±0.1 nm. Wavelength stability: <±100 MHz/h. Wavelength repeatability: ±35 pm (80 nm range), Typical: ±7 pm (at ±3 nm, after calibration). Side mode suppression ratio: >45 dB (1520 to 1570 nm), >40 dB (1500 to 1580 nm). Linewidth (typical value): 700 kHz (coherent control: Off), 50 MHz (coherent control: On). Wavelength switching time (typical value): 100 ms/1 nm, 150 ms/10 nm, 500 ms/80 nm. Output 1 Max. output power: >–10 dBm (1520 to 1570 nm), >–13 dBm (1500 to 1580 nm). Output 2 Output power: >–10 dBm. Internal modulation: 200 Hz to 20 kHz (square waveform), Duty: 50%.



 

Standard Calibration $275.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANRITSU MG9637A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Broadband Source (BBS)
A Broadband Source is a spectrally large source that emits a signal which contains a continuous range of frequencies with a broad optical bandwidth (usually 100 nm or more). Sometimes called a white light source, there are two different meanings of this term. Visible white light and a source which does not necessarily emit in the visible spectral region.

Coherence
Coherence is the pattern and or relationships of waves due to phase properties.

Linearity
Linearity is the relative difference between the displayed power ratio, Dx/D0, and the actual (true) power ratio Px/P0 caused by changing the displayed power level from the reference level, D0, to an arbitrary displayed level, Dx.

Power Flatness Over Modulation
When changing the wavelength and modulation frequency, and measuring the differences between actual and displayed power levels (in dB), the power flatness is ± half the span between the maximum and the minimum value of all differences.

Singlemode fiber
Singlemode Fiber has a small core, only about 9 microns, and is used for telephony and CATV with laser sources at 1300 and 1550 nm. It can go very long distances at very high speeds. Both multimode and singlemode fiber have an outside diameter of 125 microns - about 5 thousandths of an inch - just slightly larger than a human hair.


Please contact us for your ANRITSU MG9637A CALIBRATION and/or ANRITSU MG9637A 1500 to 1580 nm Tunable Laser Source REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: