Custom-Cal has a high success rate in the repair of the ANRITSU ML2438A. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANRITSU ML2438A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another RF Power Meter?
Shop for Comparable Products on our
 used RF Power Meter page

   ANRITSU ML2438A   Description / Specification:    
ANRITSU ML2438A 2 Channel RF Power Meter

The Anritsu ML2438A 2 Channel RF Power Meter combines the advantages of thermal meter accuracy, diode meter speed, and peak power meter display graphics. The result is a single instrument that achieves 90 dB dynamic range with a single sensor. It includes graphics display capability as a standard feature. The ruggedized housing and optional high-capacity NiMH battery bring convenience and accuracy to field service applications. Specifications. Frequency range: 10 MHz to 110 GHz (sensor dependent). Power sensors: Meter specifications apply to MA2400A series Power Sensors. Compatible with Anritsu MA and MP series sensors. Sensor Dynamic Range: MA2420A Series Fast Thermal Sensors: 50 dB, MA2440A Series High Accuracy Power Sensors: 87 dB CW, MA2470A Series Power Sensors: 90 dB CW. Power Measurement Range: –70 to +47 dBm (0.1 nW to 50W), sensor/attenuator dependent. Use couplers for higher power levels. Voltage Measurement Range: 0.00 to 20.00 V, nominal. Display Range: –99.999 to +99.999 dB. Display Resolution: Selectable from 0.1 dB to 0.001 dB limited to 0.01 dB in graphical display modes; Linear power units, 3 to 6 digit, 1 – 3 digits selectable to right of decimal nW – W; Voltage, 1 – 2 digits selectable to right of decimal. Display Units: dBm, dB, dBr, dBmV, dBmV, W, %, Volts. Instrument Accuracy: < 0.5 %. Trigger sources: Internal, External TTL, GPIB, Manual, Continuous.


Standard Calibration $205.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANRITSU ML2438A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.

Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBc (decibels relative to the carrier) is the power ratio of a signal to a carrier signal, expressed in decibels. If the dBc figure is positive, then the relative signal strength is greater than the carrier signal strength. If the dBc figure is negative, then the relative signal strength is less than carrier signal strength.

Noise Density
Noise Density is the amount of noise within a defined bandwidth, usually normalized to 1 Hz.

Spurious Signals
Spurious signals are undesired signals. They can be considered in two classes. They can be stationary; their frequency and amplitude do not change significantly, or non-stationary, where the frequency and/or amplitude change significantly over short time periods.

Please contact us for your ANRITSU ML2438A REPAIR and/or ANRITSU ML2438A 2 Channel RF Power Meter CALIBRATION

I'm interested in: 
Calibration Type (Select one):

Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:

What is the description of the problem?

How/when did the problem start?

 (*) Required Fields    For formal quote please fill in all fields.
From (Email):*
Contact Name:*
Address 1:
Address 2:
State/Territory/Province: *
Zip/Postal Code: