ANRITSU ML9001A CALIBRATION and ANRITSU ML9001A REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANRITSU ML9001A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Optical Power Meter?
Shop for Comparable Products on our  used Optical Power Meter page or new Optical Power Meter page

 
   ANRITSU ML9001A   Description / Specification:    
ANRITSU ML9001A Single Channel Optical Power Meter

The Anritsu ML9001A is a single-channel digital-display optical power meter. It insures accuracy and linearity over a wide wavelength range and greatly improves measurement reliability. It also has an improved basic performance, measurement can be made over the wide level range from –100 to +20 dBm because internal reflection in the power sensors has been suppressed. The ML9001A accurately and automatically calibrates all the power sensors within the specified wavelength range and ensures a ±5% accuracy at –23 dBm. It also has a ±0.15 dB linearity (–23 dBm reference value). The ML9001A extends the guaranteed accuracy range of the measured values and enables high-accuracy measurement. Specifications. Frequency range: 380 to 1800 nm (sensor dependent). Optical power measurement range: -100 to +23 dBm (sensor dependent). Display: 4 digit, W, W(REL), dBm, dB(REL) selectable. Calibration coefficient: Adjustable. Recorder output: 1 V/full-scale, linear output. Range select: Manual selection and automatic ranging. Measurement mode: Continuous and modulated light. Wavelength sensitivity correction: Automatic correction in 1 nm steps. Data memory: Max. 1000 data via GPIB.



 

Standard Calibration $350.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANRITSU ML9001A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bit Error Ratio (BER)
Bit Error Ratio (BER) is the ratio of errors caused by the number of bits in a data stream that have been altered due to noise, interference, distoriton or bit synchronization errors.

Flatness
Variation of insertion loss on the passband of an optical device.

Polarization Dependent Loss (PDL)
Polarization Dependent Loss is the difference between the maximum and minimum values of loss due to the variation of the polarization states of light propagating through a device. PDL is expressed in decibels. Calculated by; PDL = 10 log10 (Ep/Es), where EP and ES are the measured diffraction efficiencies for P- and S-plane polarized incident light, respectively.

Return Loss (RL)
Return Loss (RL) is the ratio of the incident power to the reflected power expressed in dB. RL = 10log (Pin/Pback)

Wavelength Resolution
Wavelength Resolution is the smallest possible displayed wavelength increment/decrement.

Please contact us for your ANRITSU ML9001A CALIBRATION and/or ANRITSU ML9001A Single Channel Optical Power Meter REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: