ANRITSU MP1590B CALIBRATION and ANRITSU MP1590B REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANRITSU MP1590B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Communication Analyzer?
Shop for Comparable Products on our
 used Communication Analyzer page or new Communication Analyzer page

 
   ANRITSU MP1590B   Description / Specification:    
ANRITSU MP1590B Network Performance Tester

The MP1590B Network Performance Tester can be used to make performance tests and jitter measurements of previous PDH, DSn, SDH/SONET, and OTN-related equipment and devices as well as OTN, EoS, virtual concatenation, and LCAS measurements of so-called next-generation networks. It uses the Ethernet plug-in modules from the Anritsu MD1230 IP Tester series to provide a single- cabinet measurement solution for IP networks. It supports use of the 10M/100M, Gigabit and 10 Gigabit Ethernet modules used by the Anritsu MD1230A without modifications, permitting genuine IP measurements such as QoS under various conditions, multi stack VLAN, and different send clocks. Since each unit/module can be used independently, multiple layers such as OTN, SDH/SONET, Ethernet, IP and TCP/UDP can be measured. A single MP1590B supports PDH (2.048, 8.448, 34.368, 139.264 Mbit/s), DSn (1.554, 44.736 Mbit/s), STM-0/1/64, STS- 1/3/192 electrical interfaces, as well as STM-0/1/4/16/64, STS- 1/3/12/48/192, OUT-1, and OUT-2 optical interfaces. Jitter generation to SDH/SONET(52-9953 MHz), OTU-1(2.66 GHz), OTU-2 (10.71 GHz) and 10.3 GHz standards can be measured using the built-in 10/10.7G Jitter Unit. Jitter Tolerance and Jitter Transfer characteristics can be measured in accordance with ITU-T Rec. G.783, G.825, G.8251, and Telcordia GR-253 recommendations. The MP1590B also supports setting/monitoring of all overheads for OTU-1 (2.66 Gbit/s) and OTU-2 (10.71 Gbit/s) conforming to ITU-T G.709. It also supports multi-frame OH.



 

Standard Calibration $780.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANRITSU MP1590B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bandwidth
Bandwidth is the difference between the upper and lower frequencies in a contiguous set of frequencies within which a fiber optic component, link or network will operate.

Multimode Fiber
Multimode Fiber has a large core (almost always 62.5 microns - a micron is one one millionth of a meter - but sometimes 50 microns) and is used with LED sources at wavelengths of 850 and 1300 nm for short distance, lower speed networks like LANs. Both multimode and singlemode fiber have an outside diameter of 125 microns - about 5 thousandths of an inch - just slightly larger than a human hair.

SDH
Synchronous Digital Hierarchy (SDH) is an international digital telecommunications network hierarchy which standardises transmission around the bit rate of 51.84 megabits per second, which is also called STS-1. Multiples of this bit rate comprise higher bit rate streams. Thus STS-3 is 3 times STS-1, STS-12 is 12 times STS-1, and so on. STS-3 is the lowest bit rate expected to carry ATM traffic, and is also referred to as STM-1 (Synchronous Transport Module-Level 1). The SDH specifies how payload data is framed and transported synchronously across optical fibre transmission links without requiring all the links and nodes to have the same synchronized clock for data transmission and recovery.


Please contact us for your ANRITSU MP1590B CALIBRATION and/or ANRITSU MP1590B Network Performance Tester REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: