The ANRITSU MP1656A is currently in stock and available for purchase on our  Sales Page
It is also available for immediate rental.
Custom-Cal has a high success rate in the repair of the ANRITSU MP1656A. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANRITSU MP1656A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Communication Analyzer?
Shop for Comparable Products on our
 used Communication Analyzer page or new Communication Analyzer page

   ANRITSU MP1656A   Description / Specification:    
ANRITSU MP1656A Portable STM-16 Analyzer

The MP1656A was designed for use with the MP1550A/B PDH/SDH Analyzer to allow analysis of section, H-path (AU), L-path (TU), PDH, etc. for STM-16 layers. The MP1656A is a compact, lightweight, lowcost solution if you need to add STM-16 capability to your MP1550A/B. The MP1656A can also be used alone to perform regenerator section tests. Bit Rate: 2488.32 Mb/s.

Optical output
Wavelength: 1550 nm (Option 01), 1310 nm and 1550 nm switchable (Option 02), 1310 nm (Option 03)
Power: +5 to -2 dBm.
Connector: FC-SPC (on front panel).

Optical input
Wavelength: 1310 ±20 nm, 1550 ±20 nm; 
Sensitivity: -9 to -29 dBm (with internal 10100101 at BER of 10^-11).
Connector: FC-SPC (on front panel).
Test pattern: PRBS: 2^11 -1, 2^15 -1, 2^20 -1, 2^23 -1 (O.151).
Word: 16 bit program, all 0, all 1. G.826 performance monitor: B1.
Built-in floppy disk drive.


Standard Calibration $780.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANRITSU MP1656A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.

Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bandwidth is the difference between the upper and lower frequencies in a contiguous set of frequencies within which a fiber optic component, link or network will operate.

Multimode Fiber
Multimode Fiber has a large core (almost always 62.5 microns - a micron is one one millionth of a meter - but sometimes 50 microns) and is used with LED sources at wavelengths of 850 and 1300 nm for short distance, lower speed networks like LANs. Both multimode and singlemode fiber have an outside diameter of 125 microns - about 5 thousandths of an inch - just slightly larger than a human hair.

Synchronous Digital Hierarchy (SDH) is an international digital telecommunications network hierarchy which standardises transmission around the bit rate of 51.84 megabits per second, which is also called STS-1. Multiples of this bit rate comprise higher bit rate streams. Thus STS-3 is 3 times STS-1, STS-12 is 12 times STS-1, and so on. STS-3 is the lowest bit rate expected to carry ATM traffic, and is also referred to as STM-1 (Synchronous Transport Module-Level 1). The SDH specifies how payload data is framed and transported synchronously across optical fibre transmission links without requiring all the links and nodes to have the same synchronized clock for data transmission and recovery.

Please contact us for your ANRITSU MP1656A REPAIR and/or ANRITSU MP1656A Portable STM-16 Analyzer CALIBRATION

I'm interested in: 
Calibration Type (Select one):

Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:

What is the description of the problem?

How/when did the problem start?

 (*) Required Fields    For formal quote please fill in all fields.
From (Email):*
Contact Name:*
Address 1:
Address 2:
State/Territory/Province: *
Zip/Postal Code: