ANRITSU MS9701B REPAIR and ANRITSU MS9701B CALIBRATION

 
Custom-Cal has a high success rate in the repair of the ANRITSU MS9701B. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANRITSU MS9701B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Optical Spectrum Analyzer, OSA?
Shop for Comparable Products on our
 used Optical Spectrum Analyzer, OSA page or new Optical Spectrum Analyzer, OSA page

As an alternative New Ridge Technologies offers the NRT-8000, the world’s Smallest Optical Spectrum Analyzer with built in “live wavelength calibration” for C-Band applications.  More
   ANRITSU MS9701B   Description / Specification:    
ANRITSU MS9701B 350 to 1750 nm Hi-level Accurary Optical Measuring Module

350 nm to 1750 nm. Measurement level range: - 80 to + 10 dBm (1100 to 1600 nm) , - 75 to +10 dBm (750 to 1100 nm) , -70 to + 10 dBm (400 to 1700 nm) , - 55 to + 10 dBm (350 to 1750 nm). Linearity: ± 0.5 dB/20 dB, ± 1 dB/60 dB. Resolution bandwidth: 0.1, 0.2, 0.5,1 , 2,5, 10 nm (500 to 1750 nm); 0.1 , 0.2, 0.5, 1, 2, 5 nm (350 to 500 nm). Hi-level Accurary Type - Optical Unit, Module (proprietary interface/bus)



 

Standard Calibration $750.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANRITSU MS9701B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bit Error Ratio (BER)
Bit Error Ratio (BER) is the ratio of errors caused by the number of bits in a data stream that have been altered due to noise, interference, distoriton or bit synchronization errors.

Flatness
Variation of insertion loss on the passband of an optical device.

Polarization Dependent Loss (PDL)
Polarization Dependent Loss is the difference between the maximum and minimum values of loss due to the variation of the polarization states of light propagating through a device. PDL is expressed in decibels. Calculated by; PDL = 10 log10 (Ep/Es), where EP and ES are the measured diffraction efficiencies for P- and S-plane polarized incident light, respectively.

Return Loss (RL)
Return Loss (RL) is the ratio of the incident power to the reflected power expressed in dB. RL = 10log (Pin/Pback)

Wavelength Resolution
Wavelength Resolution is the smallest possible displayed wavelength increment/decrement.


Please contact us for your ANRITSU MS9701B REPAIR and/or ANRITSU MS9701B 350 to 1750 nm Hi-level Accurary Optical Measuring Module CALIBRATION

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: