ANRITSU MT8820B CALIBRATION and ANRITSU MT8820B REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANRITSU MT8820B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Communication Analyzer?
Shop for Comparable Products on our  used Communication Analyzer page or new Communication Analyzer page

 
   ANRITSU MT8820B   Description / Specification:    
ANRITSU MT8820B Radio Communication Analyzer

The Anritsu MT8820B Radio Communication Analyzer platform covers a frequency range of 30 MHz to 2.7 GHz. When the dedicated optional measurement software and hardware is installed, the major Tx and Rx characteristics of W-CDMA/HSPA, GSM/GPRS/EGPRS, CDMA2000 1X (IS-2000), CDMA2000 1xEV-DO Rev. A, PHS/Advanced PHS, and TD-SCDMA/HSDPA terminals can be measured using a single MT8820B unit. When the Parallelphone Measurement option is installed in the MT8820B main frame, two different mobile terminals can be connected and tested simultaneously with a single MT8820B using its second RF, AF, GPIB, and Ethernet port. This functionality significantly improves manufacturing efficiency by reducing production costs (return on investment and energy saving) and space. General Specifications

Frequency range: 30 to 2700 MHz.
Max. input level: +35 dBm (Main).

Main I/O
Impedance: 50 ohm.
VSWR: ≤1.2 (<1.6 GHz), ≤1.25 (1.6 to 2.2 GHz), ≤1.3 (>2.2 GHz).
Connector: N type.

AUX output
Impedance: 50 ohm.
VSWR: ≤1.3 (at SG Output level: <= -10 dBm).
Connector: SMA type.

Reference oscillator
Frequency: 10 MHz.
Level: TTL.
Startup characteristics: ≤ ±5 x 10^-8 (at 10 min after startup referenced to frequency 24 h after startup).
Aging rate: ≤ ±2 x 10^-8/day, ≤ ±1 x 10^-7/year (referenced to frequency 24 h after startup).
Temperature characteristics: ≤ ±5 x 10^-8.
Connector: BNC type.

External reference input
Frequency: 10 MHz or 13 MHz (±1 ppm).
Level: >= 0 dBm.
Impedance: 50 ohm.
Connector: BNC type.

RF signal generator 
Frequency range: 30 to 2700 MHz (setting range: 0.4 to 2700 MHz).
Frequency Setting resolution: 1 Hz.
Frequency Accuracy: Due to reference oscillator accuracy.
Output Level range: -140 to -10 dBm (Main), -130 to 0 dBm (AUX).
Output Resolution: 0.1 dB.
Output Accuracy: ±1.0 dB (-120 to -10 dBm, Main, after calibration), ±1.0 dB (-110 to 0 dBm, AUX, after calibration).
Non-harmonic spurious: ≤ -50 dBc.
Harmonics: ≤ -25 dBc.
Variable range: 0 to -30 dB.
Setting resolution: 1 dB.

Display: Color 8.4-inch TFT LCD, 640 x 480 dots.
GPIB: Control from external host with main unit as device (excluding some functions such as power-on), no external device control. Hardware

Options
001, W-CDMA Measurement Hardware.
002, TDMA Measurement Hardware.
003, CDMA2000 Measurement Hardware.
004, 1xEV-DO Measurement Hardware.
005, 1xEV-DO Measurement Hardware.
007, TD-SCDMA Measurement Hardware.
011, Audio Board.
012, Parallel Phone Measurement Hardware.
031, W-CDMA Measurement Hardware Lite. 032, TDMA Measurement Hardware Lite.
043, CDMA2000 Time Offset CAL For GPS SG (requires MT8820B-003 and MX882002C).



 

Standard Calibration $1,030.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANRITSU MT8820B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bandwidth
Bandwidth is the difference between the upper and lower frequencies in a contiguous set of frequencies within which a fiber optic component, link or network will operate.

Multimode Fiber
Multimode Fiber has a large core (almost always 62.5 microns - a micron is one one millionth of a meter - but sometimes 50 microns) and is used with LED sources at wavelengths of 850 and 1300 nm for short distance, lower speed networks like LANs. Both multimode and singlemode fiber have an outside diameter of 125 microns - about 5 thousandths of an inch - just slightly larger than a human hair.

SDH
Synchronous Digital Hierarchy (SDH) is an international digital telecommunications network hierarchy which standardises transmission around the bit rate of 51.84 megabits per second, which is also called STS-1. Multiples of this bit rate comprise higher bit rate streams. Thus STS-3 is 3 times STS-1, STS-12 is 12 times STS-1, and so on. STS-3 is the lowest bit rate expected to carry ATM traffic, and is also referred to as STM-1 (Synchronous Transport Module-Level 1). The SDH specifies how payload data is framed and transported synchronously across optical fibre transmission links without requiring all the links and nodes to have the same synchronized clock for data transmission and recovery.

Please contact us for your ANRITSU MT8820B CALIBRATION and/or ANRITSU MT8820B Radio Communication Analyzer REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: