ANRITSU S113B CALIBRATION and ANRITSU S113B REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANRITSU S113B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Cellular Test Set?
Shop for Comparable Products on our
 used Cellular Test Set page or new Cellular Test Set page

 
   ANRITSU S113B   Description / Specification:   Spec Sheet 
ANRITSU S113B Site Master Antenna, Cable and Spectrum Analyzer

5 MHz to 1.2 GHz, Portable Network Analyzer for RF transmission line (coax and waveguide) and antenna installation and maintenance. Frequency Accuracy (CW Mode): 75 parts per million. Frequency Resolution: 10 kHz. Measurement Range: SWR 1.00 to 65.00, Resolution: 0.01 dB. Return Loss Range: 0.0 to 54.00 dB, Resolution: 0.01 dB. Distance-To-Fault (DTF) Range (in meters):0 to (Resolution x dp). Maximum Input (Damage Level) +22 dBm.



 

Standard Calibration $380.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANRITSU S113B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Accuracy
Accuracy is the degree of closeness of measurements of a quantity to that quantity's actual (true) value.

Jitter
Jitter in technical terms is the deviation in or displacement of some aspect of the pulses in a high-frequency digital signal. Jitter is the time variation of a periodic signal in electronics and telecommunications, often in relation to a reference clock source. Jitter may be observed in characteristics such as the frequency of successive pulses, the signal amplitude, or phase of periodic signals. Jitter is a significant, and usually undesired, factor in the design of almost all communications links (e.g., USB, PCI-e, SATA, OC-48). In clock recovery applications it is called timing jitter.

Receiver Sensitivity
Receiver Sensitivity is the optical power required by a receiver for low error signal transmission. In the case of digital signal transmission, the mean optical power is usually quoted in Watts or dBm (decibels referred to 1 milliwatt).


Please contact us for your ANRITSU S113B CALIBRATION and/or ANRITSU S113B Site Master Antenna, Cable and Spectrum Analyzer REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: