BOONTON 57518 REPAIR and BOONTON 57518 CALIBRATION
 
Custom-Cal has a high success rate in the repair of the BOONTON 57518. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the BOONTON 57518 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another RF Power Sensor?
Shop for Comparable Products on our  used RF Power Sensor page

 
   BOONTON 57518   Description / Specification:   Spec Sheet 
BOONTON 57518 18 GHz Peak Power Sensor

The Boonton 57518 Peak Power Sensor is constructed using balanced diode detectors. This dual diode configuration offers increased sensitivity and harmonic suppression when compared to a single diode sensor. It is for use with models 4400, 4500, 4400A, 4500A, 4530 and 4540. Specifications. Frequency Range: 0.05 to 18 GHz. Peak Power Range(For pulse signal only): -40 to +20 dBm. CW Power Range: -50 to +20 dBm. Int. Trigger Range: -27 to +20 dBm. Overload Rating Pulse: 1 W for 1µs. Overload Rating Continuous: 200 mW. Sensor Response Fast Risetime: < 100 ns (Bandwidth 6 MHz). Sensor Response Slow Risetime: < 10 ns (Bandwidth 350 kHz). Maximum SWR: 0.05 to 2 GHz, 1.15; 2 to 16 GHz, 1.28; 16 to 18 GHz, 1.34. Impedance: 50 ohm. RF Connector: Type N (M).



 

Standard Calibration $285.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the BOONTON 57518. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm
dBm (sometimes dBmW) is an abbreviation for the power ratio in decibels (dB) of the measured power referenced to one milliwatt (mW). Zero dBm equals one milliwatt. A 3 dB increase represents roughly doubling the power, a 3 dB decrease, the power is reduced by about one half.

Noise Figure
Noise Figure the ratio of the signal-to-noise power ratio at the input to the signal-to-noise power ratio at the output.

Standing Wave Ratio (SWR)
Standing wave ratio (SWR) is the ratio of the amplitude of a partial standing wave at an antinode (maximum) to the amplitude at an adjacent node (minimum).

Please contact us for your BOONTON 57518 REPAIR and/or BOONTON 57518 18 GHz Peak Power Sensor CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: