BURLEIGH WA-7600 REPAIR and BURLEIGH WA-7600 CALIBRATION
 
Custom-Cal has a high success rate in the repair of the BURLEIGH WA-7600. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the BURLEIGH WA-7600 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Wavelength Meter?
Shop for Comparable Products on our  used Wavelength Meter page

 
   BURLEIGH WA-7600 (WA7600)   Description / Specification:    
BURLEIGH WA-7600 Optical Channel Analyzer

Burleigh WA-7600 Optical Channel Analyzer uses Michelson interferometer-based WAVEMETER technology to determine the absolute wavelength of an optical signal under test by comparing its interference fringe pattern with that of a built-in HeNe laser wavelength standard. Wavelength Range: 1270 to 1680 nm (178 to 236 THz). Wavelength Absolute accuracy (3 sigma): ± 0.3 pm. Wavelength Minimum resolvable separation: 30 pm. Wavelength Display resolution: 0.0001 nm. Power Absolute accuracy (2 sigma): ± 0.5 dB (at ± 30 nm from 1310 and 1550 nm). Power Linearity: ± 0.3 dB. Power Display resolution: 0.01 dB. Optical Input Signal Sensitivity, single line input: -40 dBm (0.1 µW), 1270 - 1600 nm; -30 dBm (1.0 µW), 1600 - 1680 nm. Maximum input level (sum of all lines): + 10 dBm (10 mW). Optical Dynamic Range Signal-to noise ratio (lines above -25 dBm): > 35 dB, channel spacing = 100 GHz; > 27 dB, channel spacing = 50 GHz. Number of Laser Lines Input: Maximum 256. Measurement Cycle Time: 1.25 s (0.8 measurements/s). Instrument interface: GPIB (IEEE-488.2), RS-232, floppy disk drive, VGA monitor port, parallel printer port.



 

Standard Calibration $515.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the BURLEIGH WA-7600. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Broadband Source (BBS)
A Broadband Source is a spectrally large source that emits a signal which contains a continuous range of frequencies with a broad optical bandwidth (usually 100 nm or more). Sometimes called a white light source, there are two different meanings of this term. Visible white light and a source which does not necessarily emit in the visible spectral region.

Coherence
Coherence is the pattern and or relationships of waves due to phase properties.

Linearity
Linearity is the relative difference between the displayed power ratio, Dx/D0, and the actual (true) power ratio Px/P0 caused by changing the displayed power level from the reference level, D0, to an arbitrary displayed level, Dx.

Power Flatness Over Modulation
When changing the wavelength and modulation frequency, and measuring the differences between actual and displayed power levels (in dB), the power flatness is ± half the span between the maximum and the minimum value of all differences.

Singlemode fiber
Singlemode Fiber has a small core, only about 9 microns, and is used for telephony and CATV with laser sources at 1300 and 1550 nm. It can go very long distances at very high speeds. Both multimode and singlemode fiber have an outside diameter of 125 microns - about 5 thousandths of an inch - just slightly larger than a human hair.

Please contact us for your BURLEIGH WA-7600 REPAIR and/or BURLEIGH WA-7600 Optical Channel Analyzer CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: