EXFO FLS-110-03P REPAIR and EXFO FLS-110-03P CALIBRATION

 
Custom-Cal has a high success rate in the repair of the EXFO FLS-110-03P. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the EXFO FLS-110-03P Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Fiber Optic Instrumentation?
Shop for Comparable Products on our
 used Fiber Optic Instrumentation page

 
   EXFO FLS-110-03P   Description / Specification:    
EXFO FLS-110-03P Optical Polarized Source

The Exfo FLS-110-03P Optical Polarized Source is a handheld polarized source, ideal for field PMD measurements. This C-Band LED is especially suited to PMD measurements using the Exfo FTB-5500B PMD Analyzer. The Exfo FLS-110 offers CW and 2 kHz modulation for fiber identification, complete status indicators, a low-battery indicator and an Auto-Off function. The unit is housed in a sturdy, waterproof case surrounded by a shock-absorbing holster that protects the instrument in tough field conditions. Choose between the 1310 nm or the 1550 nm LED models. Both units feature high and low power levels to maximize battery life. The Exfo FLS-110-03P features three complementary power sources for extended operation. When the rechargeable NiCd battery runs low, the unit automatically switches to the 9 V alkaline battery backup. An AC adapter/charger is also supplied for continuous operation. Nominal wavelength (nm): C band. Spectral width (nm): >= 37. Emitter type: SLED. Typical output power (dBm) 9/125 µm: -13. Size (H x W x D): 220 mm x 110 mm x 50 mm (8 3/4 in x 4 1/2 in x 2 in). Weight unit: 0.75 kg (1 1/2 lb). Temperature: operating -10 °C to 40 °C (14 °F to 122 °F), storage -30 °C to 60 °C (-22 °F to 140 °F). Power NiCd batteries: 9 V alkaline batteries, AC adapter/charger, Battery life (NiCd + 9 V) 14 hours (typical).



 

Standard Calibration $240.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the EXFO FLS-110-03P. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bandwidth
Bandwidth is the difference between the upper and lower frequencies in a contiguous set of frequencies within which a fiber optic component, link or network will operate.

Extinction Ratio (ER)
Extinction Ratio is the ratio of two optical power levels, of a digital signal generated by an optical source, (example a laser diode), where P1 is the optical power level generated when the light source is "on," and P0 is the power level generated when the light source is "off." The extinction ratio may be expressed as a fraction, in dB, or as a percentage.

Optical Signal-to-noise Ratio (OSNR)
Optical Signal-to-noise ratio is the ratio between the signal power and the noise power in a given bandwidth. Most commonly a reference bandwidth of 0.1 nm is used. This bandwidth is independent from the modulation format, the frequency and the receiver. For instance a OSNR of 20dB/0.1nm could be given, even the signal of 40 GBit DPSK would not fit in this bandwidth. OSNR is measured with a Optical Spectrum Analyzer. It is generally measured at the wavelength of interest.

Repeatability
Repeatability is the variation in a number of repeated measured quantities when measurement conditions are changed and restored. The value corresponds to half the spread between the minimum and maximum value measured.

Wavelength Repeatability
Wavelength Repeatability is the random uncertainty in reproducing a wavelength after detuning and re-setting the wavelength. The wavelength repeatability is ± half the span between the maximum and the minimum value of all actual values of these wavelengths. Example test condition: uninterrupted TLS output power, constant power level, temperature within operating temperature range, coherence control off, short time span. Note: NOTE The long-term wavelength repeatability can be obtained by taken the wavelength repeatability and wavelength stability into account.


Please contact us for your EXFO FLS-110-03P REPAIR and/or EXFO FLS-110-03P Optical Polarized Source CALIBRATION

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: