EXFO FOT-932 CALIBRATION and EXFO FOT-932 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the EXFO FOT-932 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Fiber Optic Instrumentation?
Shop for Comparable Products on our  used Fiber Optic Instrumentation page

 
   EXFO FOT-932 (FOT 932)   Description / Specification:    
EXFO FOT-932 MaxTester Multifunction Loss Tester

EXPO’s FOT-932 Multifunction Loss Tester is designed to help network service providers address CAPEX and OPEX issues, enable installers to easily adapt to all network types, and provide CATV operators with a single-unit solution to their back reflection, fiber length, high power and bidirectional loss measurement needs. Combined with its video fiber inspection probe, this unit also enables the easy detection of dirty or damaged connectors, providing a clear view of connectors and fiber ends on the FOT-932’s high-resolution display. The FOT-932 is a part of EXPO’s FOT-930 series.

Power Meter Specifications:
Detector type: Ge
Measurement range: 10 dBm to -70 dBm
Range displayed: ≥ -77 dBm
Uncertainty: ± 5% ± 0.1 nW
Wavelength range: 800 nm to 1650 nm
Display resolution: 0.01 dB
Recommended recalibration period: 3 years

Source Specifications:
Single-mode wavelengths: 1310 nm, 1490 nm, 1550 nm, 1625 nm
Single-mode wavelength uncertainty: ≤ ± 20 nm
Single-mode spectral width: ≤ 5 nm
Multi-mode wavelengths: 850 nm, 1300 nm
Multi-mode wavelength uncertainty: ≤ +50 nm, ≤ -25 nm
Multi-mode spectral width: ≤ 135 nm
Eight-hour stability: ± 0.05 dB

FasTest Specifications:
Loss Range: ≤ 60 dB
Side-by-side repeatability: 0.15 dB
Loopback repeatability: 0.25 dB
Single-mode length measurement range: 200 km
Multi-mode length measurement range: 5 km
Length measurement uncertainty: ± (10 m + 1% length)

ORL Specifications:
ORL range (APC / UPC): 65 dB / 55 dB
ORL uncertainty: ± 0.5 dB
Resolution: 0.01 dB

Talk Set Specifications:
Wavelength: 1550 ± 20 nm
Dynamic range: 45 dB

VFL Specifications:
Wavelength: 650 nm
Output power: 3 dBm



 

Standard Calibration $405.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the EXFO FOT-932. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Amplified Spontaneous Emission Source (ASE)
ASE, a process where spontaneously emitted radiation (luminescence) is amplified. In lasers and particularly in high-gain erbium-doped amplifiers, amplified spontaneous emission is usually an unwanted effect. It tends to limit the gain achievable in a single stage of a fiber optic amplifier to the order of 40–50 dB.

Dynamic Range
In a transmission system, the ratio of the overload level to the noise level of the system, usually expressed in dB. Ratio of the highest to lowest detectable signal of a system, expressed in dB.

Optical Power
Optical Power is usually measured in "dBm", or decibels referenced to one miliwatt of power. while loss is a relative reading, optical power is an absolute measurement, referenced to standards. You measure absolute power to test transmitters or receivers and relative power to test loss.

Relative Wavelength Accuracy
When randomly changing the wavelength and measuring the differences between the actual and displayed wavelengths, the relative wavelength accuracy is ± half the span between the maximum and the minimum value of all differences.

Wavelength
Wavelength is a term for the color of light, usually expressed in nanometers (nm) or microns (m). In Fiber Optics the wavelenghts mostly used are in the infrared region where the light is invisible to the human eye.

Please contact us for your EXFO FOT-932 CALIBRATION and/or EXFO FOT-932 MaxTester Multifunction Loss Tester REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: