FIBERPRO PS-155-A REPAIR and FIBERPRO PS-155-A CALIBRATION
 
Custom-Cal has a high success rate in the repair of the FIBERPRO PS-155-A. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the FIBERPRO PS-155-A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Polarization Meter?
Shop for Comparable Products on our  used Polarization Meter page or new Polarization Meter page

 
   FIBERPRO PS-155-A   Description / Specification:    
FIBERPRO PS-155-A Polarization Scrambler

The FiberPro PS-155-A Polarization Scrambler is designed to give users plug-and-play operation. All you have to do is to make correct connectorizations and turn on the power. The double-stage birefringence modulator inside a PS-155-A is driven by well-adjusted electronics to achieve optimum performance regardle ss of the input SOP. Optical characteristics. Degree of polarization, DOP (at PS output is measured with a polarization controller and an analyzer. The detector bandwidth is 10kHz.): < 5%. Modulation frequencies: Factory set between 600 kHz ~ 1.2 MHz. Frequency difference: Factory set between 100 kHz ~ 200 kHz. Center operating wavelength: 1550 nm. Operating wavelength range: 40nm (DOP < 5%). Average PMD: < 0.3ps. Insertion loss: <1.5dB (with connectors). PDL: < 0.05dB (with connectors). Back reflection: < -65dB (without connector), < -60dB (FC/APC), < -40dB (FC/PC). Input/Output connectorization: FC/PC (Standard).



 

Standard Calibration $480.00 *
*This is a Web introductory price for one calibration of the FIBERPRO PS-155-A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bit Error Ratio (BER)
Bit Error Ratio (BER) is the ratio of errors caused by the number of bits in a data stream that have been altered due to noise, interference, distoriton or bit synchronization errors.

Flatness
Variation of insertion loss on the passband of an optical device.

Polarization Dependent Loss (PDL)
Polarization Dependent Loss is the difference between the maximum and minimum values of loss due to the variation of the polarization states of light propagating through a device. PDL is expressed in decibels. Calculated by; PDL = 10 log10 (Ep/Es), where EP and ES are the measured diffraction efficiencies for P- and S-plane polarized incident light, respectively.

Return Loss (RL)
Return Loss (RL) is the ratio of the incident power to the reflected power expressed in dB. RL = 10log (Pin/Pback)

Wavelength Resolution
Wavelength Resolution is the smallest possible displayed wavelength increment/decrement.

Please contact us for your FIBERPRO PS-155-A REPAIR and/or FIBERPRO PS-155-A Polarization Scrambler CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: