FLUKE 75 CALIBRATION and FLUKE 75 REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the FLUKE 75 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Multimeter DMM?
Shop for Comparable Products on our
 used Multimeter DMM page

 
   FLUKE 75   Description / Specification:    
FLUKE 75 Handheld Analog / Digital Multimeter

The Fluke 75 Handheld Multimeter provides a 3200 count digital display that gives extended resolution, and a 31 segment bar graph that reacts 10 times faster than the numerical display, allowing you to make peaking and dipping adjustments easier. With autoranging, you choose the function you want and the meter automatically selects the range with the greatest accuracy and resolution. A continuous audible tone provides a fast check for continuity of current paths having 150 ohms or less. A brief tone indicates a voltage drop of about 0.6 volts, the normal forward bias for semiconductor devices passing about 500 microamps.
Specifications.

VDC Range: 320 mV to 1000 V.
VDC Best Accuracy: ±(0.5% + 1).
VDC Best Resolution: 0.1 mV.
VAC Range: 3.2 to 750 V.
VAC Best Accuracy: ±(2% + 2).
VAC Best Resolution: 1.0 mV.
ADC Range: 32 mA to 10 A.
ADC Best Accuracy: ±(1.5% + 2).
ADC Best Resolution: 0.01 mA.
AAC Range: 32 mA to 10 A.
AAC Best Accuracy: ±(3% + 2).
AAC Best Resolution: 0.01 mA.
Resistance Range: 320 ohm to 32 M-ohm.
Resistance Best Accuracy: ±(0.7% + 1).
Resistance Best Resolution: 0.1 ohm.



 



Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Crest Factor
Crest factor or peak-to-average ratio (PAR) is a measurement of a waveform, calculated from the peak amplitude of the waveform divided by the RMS value of the waveform

Linearity
Linearity is the relative difference between the displayed power ratio, Dx/D0, and the actual (true) power ratio Px/P0 caused by changing the displayed power level from the reference level, D0, to an arbitrary displayed level, Dx.

Phase Noise
Phase noise is the frequency domain representation of rapid, short-term, random fluctuations in the phase of a waveform, caused by time domain instabilities. Phase noise (L(f)) is typically expressed in units of dBc/Hz, representing the noise power relative to the carrier contained in a 1 Hz bandwidth centered at a certain offsets from the carrier.

Sensitivity
Sensitivity is the minimum magnitude of input signal required to produce a specified output signal having a specified signal-to-noise ratio, or other specified criteria.


Please contact us for your FLUKE 75 CALIBRATION and/or FLUKE 75 Handheld Analog / Digital Multimeter REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: