FLUKE 867B CALIBRATION and FLUKE 867B REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the FLUKE 867B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Multimeter DMM?
Shop for Comparable Products on our  used Multimeter DMM page

 
   FLUKE 867B   Description / Specification:    
FLUKE 867B Graphical Multimeter

The Fluke 867B is a high precision Graphical Multimeter. It features 0.025% basic dc accuracy to discriminate low-level signal variations in transducers and analog electronics, measuring True-rms ac with bandwidth to 300 kHz, direct current from 0 to 10 Amps, with resolution down to 10nA, capacitance from 40pF to 10,000 µF., and dB gain or loss in amplifiers, filters, or attenuators. It also features an RS-232 Interface for communication to computers and printers and to import waveforms into reports. It is safety tested for IEC 1010-1, CAT III 1000 Volts for industrial distribution systems.
Specifications.

DC Voltage.
  Measurement Range: 300.00 mV to 1000.0V.
  Basic Accuracy: ±0.025%.
AC Voltage RMS.
  Measurement Range: 300.00 mV to 1000.0V.
  Basic Accuracy: ±0.5%.
  Bandwidth: 20 Hz to 300 Khz.
  AVG Bandwidth: 50 Hz to 30 Khz.
DC Current.
  Measurement Range: 300.00 µA to 10.000A.
  Basic Accuracy: ±0.05% to 0.2% N/A.
AC Current.
  Measurement Range: 300.00 µA to 10.000A.
  Basic Accuracy: ±0.75% N/A.
Resistance.
  Measurement Range: 300.00 Ohm to 30.000 MOhm.
  Basic Accuracy: ±0.07%.
Frequency.
  Measurement Range: 2 Hz to 2 MHz.
  Basic Accuracy: ±0.05%.
Capacitance.
  Measurement Range: 10 nF to 10,000 µF.
  Basic Accuracy: ±1.90%.
Waveform Display: 1 MHz.
Peak Hold: Captures positive and negative peaks ³ 10 µs.
Glitch Capture: Captures glitches ³ 1 µs.
dB/dBm.
  Measurement Range: 2, 4, 8, 16, 50, 75, 93, 110, 125, 135, 150, 300, 600, 900, 1000, 1200 Ohm references.
  Basic Accuracy: ±0.05dB.



 

Standard Calibration $260.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the FLUKE 867B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Carrier Wave (CW)
Carrier Wave or Continuous Wave is a sinusoidal signal without modulation.

Harmonic
A harmonic of a wave is a component frequency of the signal that is an integer multiple of the fundamental frequency, i.e. if the fundamental frequency is f, the harmonics have frequencies 2f, 3f, 4f, . . . etc.

Noise Floor
Noise floor is the measure of the signal created from the sum of all the noise sources and unwanted signals within a measurement system.

Ripple
Ripple is the small unwanted residual periodic variation of the direct current (dc) output

Please contact us for your FLUKE 867B CALIBRATION and/or FLUKE 867B Graphical Multimeter REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: