FLUKE DSP-4300 REPAIR and FLUKE DSP-4300 CALIBRATION
 
Custom-Cal has a high success rate in the repair of the FLUKE DSP-4300. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the FLUKE DSP-4300 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

 

 
   FLUKE DSP-4300 (DSP4300)   Description / Specification:    
FLUKE DSP-4300 LAN CableAnalyzer

The Fluke DSP-4300 LAN CableAnalyzer gives you a set of universal, compact modules that support many manufacturers’ cabling systems. Simply exchange the Personality Module (PM01 or PM02) at the end of the adapter for an easy, cost-effective solution with Cat 6 interoperability. Automatically diagnoses cabling faults and shows exact locations in feet or meters. Expanded 16 MB on-board memory saves up to a full day’s worth of testing (300 tests) if you forget your multimedia card, or fill up the card. Specifications. Range Twisted Pair Cable: 0 ft to 328 ft, 328 ft to 2500 ft. Resolution Twisted Pair Cable: 1 ft or 0.1 m. Accuracy Twisted Pair Cable: ± (1 ft (0.3 m) + 2 % of reading) (0 ft to 328 ft), ± (1 ft (0.3 m) + 4 % of reading) (328 ft to 2500 ft). Range Coaxial Cable: 0 ft to 328 ft, 328 ft to 4000 ft. Resolution Coaxial Cable: 1 ft or 0.1 m. Accuracy Coaxial Cable: ± (1 ft (0.3 m) + 2 % of reading) (0 ft to 328 ft), ± (1 ft (0.3 m) + 4 % of reading) (328 ft to 4000 ft). Propagation Delay Range Twisted Pair Cable: 0 ns to 500 ns, 500 ns to 3800 ns. Resolution Twisted Pair Cable: 1 ns. Accuracy Twisted Pair Cable: ± (5 ns + 2 % of reading) (0 ns to 500 ns), ± (5 ns + 4 % of reading) (500 ns to 3800 ns). Propagation Delay Range Coaxial Cable: 0 ns to 500 ns, 500 ns to 6000 ns. Resolution Twisted Pair Cable: 1 ns. Accuracy Twisted Pair Cable: ± (5 ns + 2 % of reading) (0 ns to 500 ns), ± (5 ns + 4 % of reading) (500 ns to 6000 ns). Delay Skew Range: 0 ns to 100 ns. Resolution: 1 ns. Accuracy: ± 10 ns. DC Loop Resistance Test: 0 to 400 ohms. Resolution: 0.1 ohm. Accuracy: ± (2 ohms + 2 % of reading).



 

Standard Calibration $550.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the FLUKE DSP-4300. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm
dBm (sometimes dBmW) is an abbreviation for the power ratio in decibels (dB) of the measured power referenced to one milliwatt (mW). Zero dBm equals one milliwatt. A 3 dB increase represents roughly doubling the power, a 3 dB decrease, the power is reduced by about one half.

Millimeter-wave
Millimeter-wave is a term that generally refers to frequencies of 26.5 GHz and above. That is where signal wavelengths fall below approximately 10 mm, and thus the terminology changes from centimeters to millimeters.

Power Repeatability
Power Repeatability is the random uncertainty in reproducing the power level after changing and re-setting the power level. The power repeatability is ± half the span (in dB) between the highest and lowest actual power. Note: - The long-term power repeatability can be obtained by taken the power repeatability and power stability into account.

Stability
Stability is the extent to which a specified property, characteristic, or parameter of a substance, device, or apparatus, remains fixed with the passage of time or with varying environmental conditions.

Please contact us for your FLUKE DSP-4300 REPAIR and/or FLUKE DSP-4300 LAN CableAnalyzer CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: