|
The Fujikura FSM-50S core aligning arc fusion splicer features include an ergonomic design, reduced numbers of operating steps and a powerful battery extend the boundaries of traditional field fusion splicing performance. The movable monitor and dual-direction operating system essentially gives the operator a choice of two splicers. Specifications. Applicable fibers: SM (ITU-T G.652), MM(ITU-T G.651), DS(ITU -T G.653), NZDS(ITU-T G.655). Fiber Count: Single. Cladding diameter: 80 to 150 um. Coating diameter: 100 to 1000 um. Fiber cleaved length: 8 to 16mm with coating diameter of 250 um or less; 16mm with coating diameter of 250 to 1000 um; Optional set-plate for 8 to 16mm with coating diameter of 250 to 1000??m is available. Actual average splice loss: 0.02dB with SM, 0.01dB with MM, 0.04dB with DS, 0.04dB with NZDS; Measured by cut-back method relevant to ITU-T and IEC standards. Splice time: Typical 9sec. with standard SM fiber. Return loss: >>60dB. Splicing modes: 40 user programmable modes and up to 60 modes for reference(factory predetermined setting). Splice loss estimate: Available. Attenuation splice function: Intentional high splice loss of 0.1dB to 15dB(0.1dB step)can be made for an in-line fixed attenuator. Storage of splice result: The last 2000 results to be stored in the internal memory. Fiber display: X / Y, or both X and Y simultaneously. Magnification: 295x for single X or Y view, or 147x for X and Y view. Viewing method: Two CMOS cameras and 5.6 inch color LCD monitor. Mechanical proof test: 2N (standard) / 4.4N(option). Tube heater: Built - in tube heater with 10 heating modes and up to 20 modes for reference. Tube heat time: Typical 35sec. with FP-03 protection sleeve. Applicable protection sleeve length: 60mm, 40mm and a series of micro sleeves. No.of splice/heating with battery: Typical 80 cycles with BTR-06(S) / Typical 160 cycles with BTR-06(L).
|
|
The INNO Instrument IFS-10 Fiber Master Core-Alignment Fusion Splicer with the New DACAS (Digital Analysis Core Alignment System) is one of the most dependable splicers on the market. The Fiber Master splicer features a rubberized design for field use in harsh weather conditions. The IFS-10 has a friendly, intuitive GUI (Graphical user Interface) with a 5 inch color LCD screen that is easy to see and is adjustable for front and rear splicer orientation. The sizeable, large battery capacity at full charge allows for up to 350 splices. Amazingly, the IFS-10 splicer is the most reliable and user friendly Core Alignment splicer in the world. Specifications. Splicing Method: Core alignment (DACAS:Digital Analysis Core Alignment System). Average Loss: SM(0.02dB) | MM(0.01dB) | DS(0.04dB) | NZDS(0.04dB). Return loss: >> 60 dB. Splice Time: 9s average SM | 7s SM Quick Mode. Pull Test: 1.96 ~ 2.25N (standard). Electrode Lifespan: > 2,500 arcs. Applicable Fiber: SM(ITU-TU.652), MM(ITU-TU.651), DS(ITU-T G.653),NZDS(ITU-T G.655), G657A, G657B. Cleaved Length Coating: diameter < 0.25mm = 8-16mm, Coating diameter > 0.25mm = 16mm minimum . Coating Diameter: 100 to 1000 um. Cladding Diameter: 80 to 150 um. Heating Programs Preset: 10 heating modes. Heating Time: FP-03 typical heating time 30 s. Protection Sleeve: 60mm, 40mm. Data Output: USB master device and COM. Splice Programs: 100 user mode. Splice Memory: Up to 2000 records. Battery: Typical full cycle 350 Splice and Heat. Power Supply: AC 100-240V input or DC 10-15V. Monitor: Color 5" LCD monitor, with tempered glass. Cameras ; 2 CCD camera system. Magnification: XY style: 150 power, X/Y: 300 power. Fiber Display: X/Y or XY, single X.Y. Weight: 2.2KG (without battery)
|