|
|
General description of the
used TEKTRONIX TPS2014
for sale.
100 MHz Battery Operated Digital Storage Oscilloscope, Four Channel. Sample Rate on Each Channel: 1.0 GS/s. Record Length: 2.5 K points. Battery Operation: Capacity for two hot-swappable battery packs, one standard battery pack offers 4 hours of battery operation. Vertical Resolution: 8 bits (normal or with averaging). Vertical Sensitivity: 2 mV to 5 V/div on all models with calibrated fine adjustment. DC Vertical Accuracy: ±3%. Max Input Voltage (1 M-Ohm): 300 VRMS CAT II at BNC signal to BNC shell, 1000 VRMS CAT II at probe tip to earth ground with optional P5120 passive, high-voltage probe. Position Range: 2 mV to 200 mV/div ±2 V, >200 mV to 5 V/div ±50 V. Bandwidth Limit: 20 MHz. Linear Dynamic Range: ±5 div. Time Base Range: 5 ns to 50 s/div. Time Base Accuracy: 50 ppm. Input Impedance: 1 M-Ohm ±2% in parallel with 20 pF. Input Coupling: AC, DC, GND. Acquisition Modes; Peak Detect: High-frequency and random glitch capture. Captures glitches as narrow as 12 ns typical using acquisition hardware at all time/div settings from 5 µs/div to 50 s/div. Sample: Sample data only. Average: Waveform averaged, selectable: 4, 16, 64, 128. Single Sequence: Use the Single Sequence button to capture a single triggered acquisition sequence at a time. Scan/Roll Mode: At acquisition time base settings of =100 ms/div. Trigger System; Trigger Modes: Auto, Normal, Single Sequence. Trigger Types; Edge (rising or falling): Conventional level-driven trigger. Positive or negative slope on any input. Coupling selections: AC, DC, Noise Reject, HF Reject, LF Reject. Video: Trigger on all lines or individual line, odd/even or all fields from composite video, or broadcast standards (NTSC, PAL, SECAM). Pulse Width (or glitch): Trigger on a pulse width less than, greater than, equal to, or not equal to a selectable time limit ranging from 33 ns to 10 s. Trigger Source: CH1, CH2, Ext, Ext/5, Ext/10. Display: 1/4 VGA, passive color LCD with color on black background with adjustable multilevel contrast and brightness controls.
|