|
|
General description of the
used CENTELLAX TR2P1A
for sale.
The Centellax TR2P1A Error Detector is designed to configure the PCB12500 as a bit error rate tester (BERT). Each head connects to the PCB12500 controller through a 1 m cable. This allows it to be located near the signal connection points in the device under test, minimizing cable loss. The modular architecture allows you to purchase only the heads your application requires. Specifications. Signal Configuration: Differential or Single-Ended mode. Data Line Coding: Non-Return to Zero (NRZ). Data Rate: 1.5 to 12.5 Gb/s. Patterns: PRBS 2^n-1, n=7, 10, 15, 23, 31. Input Amplitude: 0.1 to 2.0 V, single ended. Threshold Adjustment: -1.0 V to +1.0 V in 1 mV steps. Termination Voltage: -2.0 V to +2.0 V in 5 mV steps. Delay Range: ±1,000 UI in 1 mUI steps. Autoalign: Set optimum 0/1 threshold and data delay. Search step size range; Threshold: 5 to 20 mV in 1 mV steps, Delay: 5 to 20 mUI in 1 mUI steps, Error Threshold: 1E-6 to 1E-12. BER Measurement Period: 0 to 99,999.999 seconds in 1 msec steps. BER Results: Bit Error Rate, Error Count, Bit Count, Measurement Seconds. Phase Margin: 0.6 UI @ 10 Gb/s, 2^31-1 PRBS. Connectors: 2.92 mm female.
|