|
|
General description of the
used AGILENT 3324A
for sale.
The HP 3324A offers the capability to define up to 50 different sweep intervals, each containing its individual sweep parameters, such as start and stop frequency, sweep time, linear or logarithmic sweep and marker frequency. Up to 100 intervals can be sequenced, because the repetition of intervals is possible. In addition to the highly stable frequency the HP 3324A provides good sinewave spectral puri ty with -50 dBc phase noise and - 55 dBc spurious signals. Two 3324A can be used to generate phase related signals. After power-on, the phase between the two instruments is arbitrary. Time-consuming phase adjustments can be avoided with the automatic phase calibration options . Just enter the required phase offset, and they calibrate to this value after a simple keystroke or HP-IB command. If more than 10 V (p-p) amplitude is required then the High Voltage Option enhances the amplitude range up to 40 V (p-p) (limited for frequencies up to 1 MHz). Waveforms: Sine, Square, Triangle, negative and positive Ramps, DC, TTL clock. Specifications. Frequency Range: 1 mHz - 21,000,000.0 MHz (Sine). Resolution: 1 mHz for up to 999,999,999 kHz, 100 mHz for 1 MHz up to 21,000,000.0 MHz. Accuracy: ± 5 ppm of selected value, 20° to 30° C. Stability: ± 5 ppm/year, 20° to 30° C, standard (see also option 001). Amplitude Range: 1 mV to 10 V (p-p) in 8 amplitude ranges, 1-3-10 sequence. Resolution: 4 digits (0.03% of full range). Sinewave Phase Noise: - 50 dB for a 30 kHz band centered on a 20 M Hz carrier (excluding ± 1 Hz about the carrier). DC Offset Range: dc only (no ac signal): 0 to ± 5 V / 50 Ohm. Options. Opt 001, High Stability Frequency Reference. Opt 002, High Voltage Output. Opt 003, Automatic Phase Calibration, slave. Opt 004, Automatic Phase Calibration, master.
|