|
|
General description of the
used AGILENT 85110L
for sale.
45 MHz to 2 GHz, Pulsed-RF S-Parameter Test Set, Four 90 dB step attenuators protect each input of the fundamentally-mixed down converter to allow measurement of test devices with output power of 50W CW. For use in pulsed-RF measurement systems. Test Ports (Front Panel): Connector Type: 7mm, Impedance: 50 ohms nominal, Incident signal attenuation rane: 0 to 70 dB in 10 dB steps, Damage input level: >+20 dBm CW RF, Nominal operating power level: 0.045 to 2 GHz, 0 dBm, Nominal connector nut size: 20 mm, Recommended torque: 136 Ncm (12 in-lb). RF Connectors (Rear Panel): Connector Type: SMA female, RF source power level: Damange input level: >+23 dBm, Minimum: 0 dBm, Maximum, +14 dBm, Nominal operating level: +6 dBm to +9 dBm, Nominal connector nut size: 8mm, Recommended torque: SMA: 56 Ncm (5 in-lb), Lo Source Power Level: Minimum: +7 dBm, Maximum: +13 dBm, Test Ports (Front Panel): Nominal: +10 dBm, Low Power Out: Damage input level: >+20 dBm CW RF
|