|
|
General description of the
used AGILENT 8593E
for sale.
The Agilent 8593E portable spectrum analyzer brings comprehensive measurement capabilities to RF, microwave, and digital applications. The Agilent 8593E has a low phase noise of -105 dBc at 30 kHz offset and frequency-synthesized accuracy of 2.1 kHz at 1 GHz, which can be improved to 210 Hz with an optional precision frequency reference. Second- and third-order dynamic ranges are 77 and 90 dB, respectively. Calibrated amplitude range is +30 to –130 dBm with Option 130, and calibrated onscreen display range is 70 dB. Narrow resolution bandwidths of 30, 100, 200 EMI, and 300 Hz are available on an optional circuit card, which can be added to this analyzers at any time. Specifications. Frequency Span Range: 0 Hz (zero span); [10 x N] kHz to 19.25 GHz: [1 x N] kHz min (Opt 130). Frequency Span Resolution: Four digits or 20 Hz x N. whichever is greater. Frequency Span Accuracy Span =10 MHz x N: ± 2% of span. Frequency Span Accuracy Span >10 MHz x N: ± 3% of span. Sweep Time Range: Span = 0 Hz or > 10 kHz: 20 ms to 100 s. Resolution bandwidth range: 30 Hz to 3 MHz. Video bandwidth range: 30 Hz to 1 MHz in 1, 3 sequence (1 Hz to 1 MHz with Opt 130). Amplitude Range: Displayed average noise level to +30 dBm. Average noise level (narrowest RBW): -117 dBm. Optimum dynamic range 2nd/3rd order: 103 dB / 81 dB. Amplitude accuracy: ± 2.7dB. Data Storage (nominal)Internal: 50 traces; 8 states. Options: Opt 004; Precision Frequency Reference. Opt 009; LO and Sweep + Tune. Opt 010; 50 ohm Built-in Tracking Generator, 9 kHz to 2.9 GHz. Opt 012; Source for DECT Receiver Test. Opt 021; HP-IB Interface. Opt 023; RS-232 Interface. Opt 024; Parallel Printer Interface. Opt 026; 26.5 GHz Frequency Extension, APC 3.5 mm Connector. Opt 027; 26.5 GHz Frequency Extension, Type-N Connector. Opt 041 HP-IB and Parallel Printer Interfaces. Opt 043; RS-232 and Parallel Printer Interfaces. Opt 050; Improved Amplitude Accuracy (NADCTDMA bands). Opt 051; Improved Amplitude Accuracy for PDC Bands. Opt 052; Improved Amplitude Accuracy for PHS Bands. Opt 053; Improved Amplitude Accuracy for CDMA Bands. Opt 101; Fast Time Domain Sweeps and Analog + Display. Opt 102; AM/FM Demodulator and TV Sync Trigger(TV Sync requires Opt 101). Opt 103; Quasi-Peak Detector/AM-FM Demodulator. Opt 105; Time-gated Spectrum Analysis. Opt 107; TV Receiver Video Tester. Opt 110; CT2 Demodulator. Opt 111; Group Delay and Amplitude Flatness. Opt 112; DECT Demodulator. Opt 119; Noise Figure. Opt 130; Narrow Resolution Bandwidths (30 to 300 Hz and 200 Hz EMI). Opt 140; Narrow Bandwidths and Precision Frequency. Opt 151; DSP, FAST ADC, and Digital Demodulator. Opt 160; PDC, PHS, NADC, and CDMA Firmware for Option 151. Opt 163; GMS/DCS1800 Firmware for Option 151. Opt 180; TV Picture NTSC/PAL/SECAM. Opt 301; TV Sync Trigger, Fast Time Domain Sweeps, AM/FM Demodulator, Analog + Display. Opt 711; 50/75ohm Matching Pad/100 Vdc Block.
|