Used FLUKE 5200A Buy / Purchase at the right Price.
Custom-Cal has a used FLUKE 5200A Precision Alternating Voltage Calibrator in stock and ready for purchase at a fair price. All units sold by Custom-Cal are provided with an applicable NIST traceable calibration/performance verification and a 90 day warranty (unless otherwise noted). With this added service, you can be confident that you are buying a fully functional unit that meets OEM specifications.

We are always willing to work with the customer on price. If you would like to buy a used FLUKE 5200A but, don't see the price you want, please name your price below and we will try to find one for you to purchase.
FLUKE 5200A Precision Alternating Voltage Calibrator


General description of the used FLUKE 5200A for sale.
The Fluke 5200A Precision Alternating Voltage Calibrator is a precision high-performance alternating voltage source with proven reliability and exceptional stabi lity and accuracy over a broad frequency range. It is specified over a wide 0°C to 50°C operating range for use in both laboratory and manufacturing environments. Amplitude is controlled in six ranges from 1 mV to 100 V. Resolution to 1,199,999 counts yields 20% overrange capability with 1 nanovolt steps on the 1 mV range, up to 0.1 mV steps on the 100 V range. Outputs from 100 µV RMS to 120 V RMS are provided, with up to 50 mA load current capability. An additional 1000 V range is included for front panel or remote interface control of a 5205A or 5215A Precision Power Amplifier. Amplitude error measurement for voltmeter calibration is provided in two ranges, ±3% and ±0.3%. Error measurements can be resolved to 10 ppm. Five frequency ranges are provided from 100 Hz to 1 MHz, with 119,999 count resolution for 20% overrange capability with 0.01 Hz steps on the 100 Hz range, up to 100 Hz steps on the 1 MHz range. The oscillator of the 5200A may be phase locked to an external source to produce synchronous signals of precision amplitude and stability. Signal phase is locked within ±1° a of phase angle, ±0.05°/kHz, over a ±2% band around the center frequency. This capability is essential for 50 Hz calibration. A 3V pulse signal is provided for monitoring frequency with an external counter. A quadrature output signal is provided which leads the fundamental signal phase by 90°. Amplitude varies from 1 V to 10 V rms, proportional to the fundamental signal output level on any range. This signal is useful for wattmeter calibration, and for research and development tasks that use the 5200A as a precision source.

       Stock Photo     

Unfortunately, the instrument you wanted to buy has recently been sold.
But, if you fill out the form below, we will get back to you with availability and price.
Please check the similar instruments available for purchase below.



Similar Instruments Available for Purchase. Please follow links for more information and price.

 ManufacturermodelInstrument TypeOEM NameStarting Price
Price and InfoFLUKE332DCalibratorDC Voltage Standard/Null DetectorBuy it Now Price $3,000.00
Price and InfoFLUKE5100BCalibratorFive-function Calibrator, AC/DC Voltage AC/DC Current ResistBuy it Now Price $2,850.00
Price and InfoFLUKE5520ACalibratorMulti-Product CalibratorBuy it Now Price $40,000.00

Contact us to buy used FLUKE 5200A at the Purchase Price you want.
Calibration Type (Select one):
 (*) Required Fields    For formal quote please fill in all fields.
From (Email):*
Contact Name:*
Company:
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*


Comment: