|
|
General description of the
used FLUKE 87 III
for sale.
The Fluke 87 III 4000-count DMM provides 11 functions for electronic and industrial applications, including high performance dc/ac voltage and current measurement, frequency, duty cycle, resistance, conductance, and capacitance measurement. It is EMI shielded and comes with a splash-proof and dust-proof case. A protective holster enables safe use under harsh operating conditions. Features. Min/Max/Average recording mode with Min/Max AlertTM; stores the highest, lowest and 36-hour average of all readings, allowing signal monitoring for seconds or days. Min/Max Alert gives an audible tone for readings above or below previous minimums or maximums. Frequency, duty cycle and capacitance measurements. 1000V rms input protection; Input Alert provides an audible warning if the test leads are in current, but the function switch is not. This reduces the risk of damage to the equipment being tested and to the meter. Provides 1000 volt rms input protection in both ohms and diode test. 3%-digit, 4000 count display updates 4 times per second, analog display updates 40 times per second. 4.5-digit mode, 19 999 counts and True-rms ac voltage and current. Ranges. VDC: 400 mV - 1000V. VAC (1 kHz to 2.5 kHz.): 400 mV - 1000V. mADC: 40.00 mA - 10.00 A. mAAC (45 Hz to 2 kHz): 40.00 mA - 10.00 A. µADC: 400.0 µA - 4000 µA. µAAC (45 Hz to 2 kHz): 400.0 µA - 4000 µA. Resistance: 400 ohm - 40 M-ohm. Conductance: 40 nS. Capacitance: 5.00 nF- 5.00 uF. Frequency (0.5 Hz to 200 kHz, pulse width >2 µs): 199.99 Hz -199.99 kHz.
|